Mario 
Ally Member
評論
-
Hi Kay Thank you for your reply. >Yes, the WBE530 can be managed in controller mode. Since this model is newly released, it hasn’t been >added to the current AP Controller firmware list yet. However, it will be included in the AP support list in a >future firmware release. Do you have an ETA? >Please note that while the…
-
@mMontana I understand your point. an up-to-date version of all signatures should be supplied with at least every firmware release! after an update i always run an update of all signatures to reduce the attack surface. the firmware 5.73.2 from today delivers signatures from november 2023 😒
-
Hi @techsupport I had a similar problem after a FW Upgrade. On my System was a change on the Log Settings, maybe this helps you.
-
Hi Nathanoum I have also had this problem with HP devices, the reason was the HP LAN / WLAN / WWAN Switching UWP service. When the service is stopped, it worked for me. Good luck
-
Hi @GruppoEmiliani Please check the supportpage of Zyxel EMEA, there you find ann FAQ covering your issue: https://support.zyxel.eu/hc/en-us/articles/11616709217810 good luck Mario
-
Additional information can be found at zyxel EMEA https://support.zyxel.eu/hc/en-us/articles/11616709217810
-
@Zyxel_Stanley Thanks for your feedback. Since zyxel was able to create a fix for the problem, it must be obvious where the problem is? Over which port / service is the attack taking place?
-
By the way: The fixed firmware can be found at the following link: https://onedrive.live.com/?authkey=%21ABWbXyqWe9ilNPE&id=A33C4D75C38DDF7D%2129181&cid=A33C4D75C38DDF7D
-
Hi jsnsm14 Back in the old days, Zyxel had MFA Token (Zyxel Zywall OTP 5).. We use Watchguard Authpoint to protect SSL VPN with MFA and use the Push function.
-
I am of the same opinion as @mMontana Openvpn (and now wireguard) have been requested by the community for many years, but zyxel does not listen to its customers and partners. now it is announced for the next generation, but the USG platform goes EOL at the end of december 2022 and these new atp devices will never get this…
-
Hi @AndreasC and @Zyxel_Kevin I got a notification about the update of my topic in the forum and I can confirm some kind of troubles:Situation on an ATP200 Situation on an ATP500 The update to 5.32 was done weeks ago, so it was working after the update but since 2022-12-15 I don't get updates...
-
Hi @NEP Please try to add an additional route:Network > Routing > Static Route > Add: Destination IP: 192.168.X.0 (Remote Subnet ; same like Remote Policy at VPN Phase2) Subnet Mask: 255.255.255.0 (Mask of remote Subnet) Interface: lan1 (your local Interface) The cause of the problem is, that the target firewall send the…
-
@Zyxel_Kevin thanks for the firmware. Installed on 3 device last night, now I keep an eye on it.
-
Hi KevinI still have problems with FW V5.31(ABFU.0)ITS-22WK31-r104914 on an ATP500.See the screenshot from today, signature is from 2022-08-21 and the last check was 2022-08-23 12:51 After forcing an update I got a new signature from 2022-08-22!I created a ticket for this issue.
-
thank you zyxel for listening to your partners and customers!
