Zyxel_JonasTan 
Zyxel Employee
評論
-
Hi @Thomas2409, Welcome to Zyxel Community! Based on your description, are you referring to firmware? Because ES2024PWR Zyxel switch doesn't need a software to install on it. But you may refer to this link for ES2024PWR download library to search related information that you needed. But if there isn't may I know the…
-
Hi @fabiolanza, Based on your description, please make sure that the GS1900-8 still reachable by using the command prompt to PING the IP of the switch. Then try every following step below then re-login: 1. Clean the cache of the browser.2. Use "Private browsing mode".3. Reboot the switch.4. Reset the switch. Hope it helps.
-
Hi @fabiolanza, Zyxel switch GS1900-8 is a smart-managed switch. Therefore, all configuration must be modified via WebUI. Telnet and SSH are for internal debug usage only. Note: Use "?" symbol to show the switch supported command.
-
Hi @Sparkie, Regarding this event, we had already fixed it and will be enhanced on the next firmware released.Appreciate the time and effort consulting us. BTW, GS1900-24E switch is for business, I suggest to post a discussion to Zyxel Biz Forum next time. :) Best Regards,
-
Hi @Sparkie, Regarding this event, we had already fixed it and will be enhanced on the next firmware released.Appreciate the time and effort consulting us. BTW, GS1900-24E switch is for business, I suggest to post a discussion to Zyxel Biz Forum next time. :) Best Regards,
-
Hi @Sparkie, Thanks for the video.I had already reproduced the event in my local LAB and we are already working on it. Kindly wait for my update. Thanks.
-
Hi @Poul_Nielsen, Welcome to the Zyxel community. I have noticed you post the same topic on our business forum.Please refer to the following link to continue the discussion: https://businessforum.zyxel.com/discussion/1515/gs1900-10hp-loses-settings-after-power-off Thanks.
-
Hi @anon71, Sorry for the late response. 1. Based on your description, I assume that your network setup is like the picture below. After you change the settings to DHCP, your PC could not be able to connect the GS1900-8HP web GUI page due to it only has wifi interface through the router. NIC card for ethernet and wifi are…
-
Hi @sebastien_p, Welcome to Zyxel Community! Based on your description, please help to verify that after pressing more than 10 secs. the switch will reboot. Then is the switch SYS led light is fixed green after a while? or the LED is always blinking? If the SYS led is fix green, it means that the switch is successfully…
-
Hi @ankych, First, I would like to clarify that you've successfully retrieved the IP address of ES3500-24, right? And you used web GUI to upgrade to latest firmware. Based on the description, all consoles cannot be accessed from switch including via console cable(r232)? If yes, please help to check SYS led status, is the…
-
Hi @ankych, Welcome to Zyxel Community! ZON could only scan Zyxel devices within the same broadcast domain or directly connecting the PC (with ZON utility) to the Zyxel switch. And for ES3500-24 the starting firmware compatible with ZON utility is AABR.5 and up. Please download and upload the latest firmware in this…
-
Hi @ChristianG, Good day. Yes, there is a known issue for restore backup configuration and already fixed in the latest patch V4.50(ABxx.3)C0, please upload the latest firmware. (Firmware Link) But based on your encountering issue, it is more related to a typo of the command because we don't have the command line…
-
Hi @cuong, Thanks for the test result. Please help to make a test with the following to trace out the root cause of the event: 1. Moved the left LG TV and directly connect to XGS4600 port 1. 2. Configure Static Multicast Forwarding on XGS4600; 1) MAC-address = 01:00:5e:44:44:45 (234.68.68.69) 2) VID = 99 3) port = 1 Note:…
-
Hi @Zactron, Welcome to Zyxel Community! Based on the description, if the SYS led is not the blinking after powering the switch. The issue is confirmed related to a hardware issue and it doesn't have any recovery solution. Having a hardware issue could affect the software with some unexpected issue like booting up will…
-
Hi @ChristianG, We had an internal meeting regarding this case. The encrypted password for GS1920v2 series admin credentials had already added in Zyxel future roadmap and already listed in the Idea section. Thanks for your advice.
