amateur_netops 
Freshman Member
評論
-
Oh - is there a way to rename those vti-wizzard something things to something more meaningful. Will be a pain to keep track if I have several
-
OK - got this to work - thank you. I had to delete the other connections between other subnets on those sites and also manually route them. Then I had to change MTU to 1300 on the WAN port since tracert would work but http or https did not - somewhat odd - and a little slower than I would have expected. But got it working…
-
But there is no next hop=VPN - that was what I as whining about and was initially told we would get in October. The options on the Flex are: Auto, Interface, gateway,, gateway-ip and trunk - VPN is not an option
-
I ended up rebuilding the 100H after a factory reset - made all VPNS IKE2 now - still didn't work. Set MTU to 1300 - now works. Thank you!
-
Hmm - disappointing that the feature has not been added as previously stated by Zyxel support - it is the only reason I bought another Flex H for another home. I don't see how the guide helps me since traffic to the internet will not go through the tunnel. Here is a simplified scenario: Site A has two networks -…
-
UPDATE - So I upgraded usdagtw (the way name my gateways) to a Flex 200HP - the issue must be on the 100H at atkdgtw - I can access things behind the 200HP just fine from other Zywall 110 or USG 40 locations. I cannot access stuff on port 80 or 443 behind the 100H from the network with the 200HP either. So here is a test…
-
I bought a 200HP for the house I am currently at - to replace a 110. Allows me more opportunity to experiment too. It arrives tomorrow.
-
Hi Kay, I only tried it on the site I am at - but it did not make a difference from here. I still think it has to do with some security setting or service. I am currently in 192.168.100.X - the network behind the FlexH is 192.168.111.X - with the device being 111.1 Ping from 100.x to any device in 111.x works RDP to 111.8…
-
I have no static routes nor active policy routes on the 100H - I do have a whole bunch of policy routes on all of the old 110s. But since I didn't touch those (and they all make sense to me) I don't expect the issue there.
-
First of all - thank you for responding. I do not have a NAT rule with external IP set to any(thing) - and my apologies if this something obvious I should understand - but what would that do? I assume we are talking about the 100H - it has no configured NAT rules
