-
[SCR] Why I can't find remote access VPN setting for SCR50AX?
Question: Why I can not find remote access VPN setting on SCR50AXE? Answer: SCR50AXE supports site-to-site VPN, but does not support remote access VPN.
-
[SCR] I can't find the SSID on my device after configuring WiFi 6E on SCR50AXE
Scenario: Why I cannot find the SSID on my smartphone? Answer: Check if 6GHz WiFi is enabled for the SSID Go to Monitor > Devices > Security router, scroll down to status Go to Configure > Security router > SSID settings, and check if 6 GHz is included in band mode. If still cannot find the SSID after confirming the SSID…
-
[SCR] How to configure bandwidth control on SCR50AXE?
Question: How to configure bandwidth control on SCR50AXE? Answer: SCR50AXE does not support bandwidth control.
-
[SCR] Does Security Router SCR50AXE support bandwidth control?
Question: Does SCR50AXE support bandwidth control? Answer: No, it's not supported by SCR50AXE.
-
[SCR] How to set up VLAN interface on WAN port for SCR via local WEB GUI?
1.Open browser and key in Gateway IP address : 192.168.168.1(default) to access Web GUI 2.Click the icon of the Connectivity 3. You can manually edit your VLAN Interface on this page by enable the VLAN option.
-
[SCR] How to set up VLAN interface on WAN port for SCR on Nebula?
1.Navigate to Configure > Security router >Interface. 2. Click Edit icon on WAN Interface 3. You can find the VLAN ID settings on this page. Enable the VLAN option and enter the VLAN ID in your WAN settings, then click 'Save' to complete the configuration of your WAN interface's VLAN ID.
-
Does SCR support configuring Priority (PRI) in 802.1Q VLAN settings on WAN?
Does SCR support configuring Priority (PRI) in 802.1Q VLAN settings on WAN? The SCR support to set up VLAN interface on WAN interface You can refer to the article below: [SCR] How to set up VLAN interface on WAN port for SCR on Nebula? [SCR] How to set up VLAN interface on WAN port for SCR via local WEB GUI? For advance…
-
How to make NAT Loopback works on SCR 50AXE?
If you encounter a scenario where you're unable to forward a network request back to the same network using a domain name on the WAN IP address, you can follow the guide below to manually set up NAT Loopback. Note: 1.Require a domain name for your WAN IP address. 2.The mapping ports on external and internal ports must be…
-
How can I change the WAN IP address on SCR via the local web GUI?
1.Open browser and key in Gateway IP address : 192.168.168.1(default) to access Web GUI 2.Click the icon of the Connectivity 3. You can manually edit your WAN Interface on this page.
-
[Nebula] Why my SCR50 AXE cloud symbol is blinking on the SCR device?
When SCR 50AXE cloud symbol is blinking Green, it means the device currently can reach the Nebula but the device is not registered at the moment. When you are installing SCR device you may see the cloud symbol blinking green. When the SCR 50AXE cloud symbol is blinking yellow, it means the device is not available to reach…
-
[Nebula] How to collapse the menu on Nebula?
Question: How to collapse the menu on Nebula? Answer: Click on the icon to collapse or expand menu.
-
[Nebula] How to configure allow list to bypass captive portal on Nebula?
Question: How to configure allow list to bypass captive portal on Nebula? Answer: In LAN interface, configure IP/MAC binding for clients. (Note: On nebula, it supports bypassing captive portal by IP address only. Hence, you need to configure IP/MAC binding for the bypass client.) Go to Clients > Client list. Select the…
-
[SCR]Why are some hosts unable to be controlled by the SCR50AXE content filter service?
Question: We are testing the content filter service on SCR50AXE. Why are some hosts unable to be controlled by the SCR50AXE content filter service? Answer: Please check if DNS over HTTPS (DoH) is enabled on the Windows host. The SCR50 content filter would not work if hosts have DoH enabled. To check if DNS over HTTPS (DoH)…
-
How to assign DNS server for the client connected SCR device on Nebula
Navigate to Site-wide > Configure > Security router >Interface Click “Edit” on Lan Interface Go to DHCP setting > DNS server to configure your DNS server IP address, and click “Ok” Once you have made the changes, click "Save" to apply the new configuration to the SCR device. The DNS server will now be set on the Lan…
-
[SCR] How to check the SCR status on Nebula
Where to find: Devices > Security Router Function description: This page allows you to monitor the Nebula SCR router detailed information if you have received an alert email of your router is showing alert of device getting offline. Scenario: When you registered SCR router on Nebula and waited for it to online. You can…
-
Zyxel Networks Announces Minor Enhancements to Security Appliances
Zyxel Networks Announces Minor Enhancements to Security Appliances Zyxel Networks, a leading provider of networking devices, is excited to announce a series of minor enhancements to our security appliances. These updates aim to improve functionality and user experience across various product series. Here’s an overview of…
-
Enhancements to the Zyxel Networks Security Router Threat Report
Enhancements to the Zyxel Networks Security Router Threat Report Zyxel Networks is committed to continuously improving the security and user experience of our products. In our latest Nebula 17.30 update, we've introduced significant enhancements to the Security Router Threat Report feature, ensuring our users have more…
-
Enhancing Network Flexibility with Zyxel's Security Router Smart Mesh
Enhancing Network Flexibility with Zyxel's Security Router Smart Mesh In the ever-evolving landscape of networking technology, Zyxel Networks remains at the forefront, continually enhancing its product offerings to meet and exceed the demands of modern businesses. A prime example of this innovation is the upcoming update…
-
Enhancing Network Performance with Security Router Traffic Shaping
Enhancing Network Performance with Security Router Traffic Shaping In the latest January update, Zyxel Networks introduced an innovative feature to its security routers - USG Lite 60: Application Traffic Shaping. This addition offers unprecedented control over bandwidth allocation at a granular level. Here's an in-depth…
-
Is it possible to reboot the device when SCR shows disconnected from Nebula?
It is not possible to reboot the device when SCR shows disconnected from Nebula When a disconnection between the device and Nebula occurs, configurations on Nebula will not deploy to the device. Additionally, all configurations within the Nebula app will not be sent to the device either. This is because the Nebula app also…