It would be very handy to be able to enable/disable logging on multiple Security Policy Control rules at once, just like enable/disable the rule itself!
I wish to have country filter in log viewer to see whats happening on connections faster. Maybe by name or some kind of dropdown.
This discussion was created from comments split from: Security Policy Hits Description: Integrated with Tufin SecureTrackClick like if you think the feature is useful and beneficial.
This discussion was created from comments split from: SMB1 protocol Description: SBG Series support file sharing with SMBv2 or SMBv3
Default deny rule to show what protocol is being denied in log if its TCP or UDP currently it dose not show what protocol is being denied.
Today I started with the configuration of a brand new customer network. This is done in our own office and the final installation on site will be mid-december. While going through the mandatory registration for the USG210, all UTM Licenses were immediately activated. Customer will now benefit from them only 11 months (1…
Add Source port drop down when making firewall Policy control rule.
This discussion was created from comments split from: Virtual Server FQDN based Description: Add FQDN object into NAT rule for forwarding traffic to different local servers.
Can we get geographic areas grouped like here: I want to block most of the countries to access my Zyxell and it will be great improvement to do it fast. I think many users will use this feature.
When making a NAT rule you select for port mapping type ports to port where you can set external start port e.g. 49142 and external end port e.g. 65535 to internal port e.g. 80
Change the port for SSL VPN so the SecuExtender can connect on another port other then 443.
As it is you can reset the the config on the same firmware that is active but what if you need to load the stand by firmware? With the device unplugged would it be possible to hold the reset in and plug in the device to trigger a firmware toggle to the stand by firmware?
Now there are only 3 settings for logging of security rules: no log, log in black, log alert in red.I would like to have some more custom possibilities like log debug in blue, warnings in orange, log ok in green and so on.This would be helpful for debugging or controlling of security rules.
This discussion was created from comments split from: Security_Update outdated Description: Block everything and allow all the antivirus upgrade only Click like if you think the feature is useful and beneficial.
So the feature could also be used by linux clients!
This discussion was created from comments split from: Using SendGrid as SMTP server Description: Enlarge the password length of the E-mail account to more than 70 characters due to SendGrid API usage.
So this is a bit of both how to use proxy arp and making it more secure as the current way is needed for clients that have static IPs without a gateway set. With ARP for ports 15, 16 and 18 are sent to out to port 17 this is where proxy arp comes in to play so 192.168.255.55 wants a connection with 192.168.255.53 ARP is…
This discussion was created from comments split from: Failed Connectivity Check cause VPN terminated Description: To support customize MSS setting in interfaces can prevent TCP packets are fragmented by routers in the path.
Will fix my ISP DHCP problem with my current real DMZ problem too Big ask to solve my ISP problem with DHCP. — Zyxel Community
It looks like you're new here. Sign in or register to get started.