AAAAL  Ally Member

Hi VMG1312_B10D, Try to clear the browser cache to see if the firmware upload process can succeed.

Hi Kails The GUI will show 2.4G configuration in Wireless page at the first time, and we can select 2.4G/5G in: Wireless Network Setup -> Band to do the wireless configuration.

Hi RichTea, VMG1312 do not support this feature and cannot achieve this via CLI or other ways. Thank you.

Hi RichTea, VMG1312 will not create an IA_PD for its downstream network interfaces, that’s why you get the status-code NoPrefixAvail. The IPv6 prefix setting in GUI is for the LAN client can use this prefix to have own v6 address. I think you can have a look that VMG will have an Advertisement for “Prefix Information” take…

Hi jfolpf, May I have your VMG8324-B10A firmware version? Have you tested wireless throughput on all your devices? What’s your laptop wifi properties and how many routers used 2.4g in your environment? We cannot expect the wireless throughput has the same as physical cable because some factors may affect the result. E.g.…

Hi RichTea,May I know your LAN client under the VMG can use the IPv6 connection to the Internet without a problem? Change LAN side IPv6 Prefix Setup to Static, you can find the prefix parameter in the packets or not?

Hi RichTea, What’s your VMG1312-B10D firmware version? You cannot find “Prefix Delegation” in GUI Network Setting -> Broadband -> WAN Interface? If change the LAN IPv6 Address Setup to “Static”, LAN client can have the IPv6 prefix from VMG or not?

Hi Dell, LAN DHCP server is working from your side without the issue now? We can fix this case via reset the router, right?

Hi Dell, May I know your VMG8924-B10A firmware version? Do you reserve some LAN IP address for some special MAC in GUI? If we reboot the router, it will still happen or not?

Hi stefano_sb, May I have your VMG8825 firmware version? Please share your connect steps and what's the error message?

Hello, On the Management WAN tab (Configuration > Network > WAN > Management WAN > Modify) – - select the “Dial-up Profile” as “Manual”. - select “Country” as “Spain”. - select “Service Provider” as “Others”. - fill in the “APN”. For example, if the APN is “internet”, please fill in “internet” in the APN field. - if there…

Hello, On the Management WAN tab (Configuration > Network > WAN > Management WAN > Modify) – - select the “Dial-up Profile” as “Manual”. - select “Country” as “Spain”. - select “Service Provider” as “Others”. - fill in the “APN”. For example, if the APN is “internet”, please fill in “internet” in the APN field. - if there…

Hello, On the Management WAN tab (Configuration > Network > WAN > Management WAN > Modify) – - select the “Dial-up Profile” as “Manual”. - select “Country” as “Spain”. - select “Service Provider” as “Others”. - fill in the “APN”. For example, if the APN is “internet”, please fill in “internet” in the APN field. - if there…

Hello, On the Management WAN tab (Configuration > Network > WAN > Management WAN > Modify) – - select the “Dial-up Profile” as “Manual”. - select “Country” as “Spain”. - select “Service Provider” as “Others”. - fill in the “APN”. For example, if the APN is “internet”, please fill in “internet” in the APN field. - if there…

Hello, On the Management WAN tab (Configuration > Network > WAN > Management WAN > Modify) – - select the “Dial-up Profile” as “Manual”. - select “Country” as “Spain”. - select “Service Provider” as “Others”. - fill in the “APN”. For example, if the APN is “internet”, please fill in “internet” in the APN field. - if there…