Comments
-
After wiped HDDs, factory reset, readded disks, FW update... it works normally!
-
After I changed the working directory to /tmp/tmpfs/, the lsfof | grep md? are empty. Unfortunately the mdadm --stop is'nt working. The message unchanged. --force option is not hepled. md1 was a swap partition. It is destroyed. Only md0 is there. I think, I will force destroy it with dd, after that I will remove the raid…
-
I can not remove the md1 array. And I dont know what is it. / # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] md1 : active raid1 sdb2[0] sda2[1] 1998784 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb1[0] sda1[1] 1997760 blocks super 1.2 [2/2] [UU] unused devices: <none>/ # / # mount…
-
I wrote a long comment but it disappeared. I'm doing something now and I'll come back and report the results. Thanks for the info!
-
The device has been rebooted (several times).I did a factory reset from the menu because it didn't work with the physical button. I tried reinstalling the current firmware (I don't know if it was successful because the web interface was not clear). After that, the transmission setting (9091) was still there under the upnp,…
-
Try viewing it from the command line with the top command. I think the web gui doesn't show it well.
