Brano

Thank you for your post Tobias. I added route policies suggested by the guide, but packets are not still reaching Site B LAN. Site A Routes WIZ_Site2Site_Kop ---- Site2site VPN tunnel WIZ_Site2Site_Kop_Remote ---- Site B LAN 10.10.20.0/24 VPN IP Range ---- VPN Clients IP range 10.11.11.1-200 it does not conflict with any…

in How to forward traffic to branch site server after client established VPN tunnel Comment by Brano February 2021

I reset the device and set it up like new. And my Site2site VPN starts working. Previously I take the device from other link and just change WAN IP, but it turns out that it was behind NAT before. So I assume that the fact that initial VPN tunnel configuration was done on the link behind NAT caused it was not working after…

in Site-to-Site VPN - no traffic passing through tunnel Comment by Brano February 2021

Hi Stanley hope you're doing well I'm in very same scenario as described in your schema and I'm trying to make available Site B LAN subnet for VPN IPsec Clients. I added routing policy rules, but I still cannot reach Site B IPs. Site A ZyWall 110 Site B USG Flex 200 VPN SitetoSite works ok IPSEC VPN for clients connecting…

in How to forward traffic to branch site server after client established VPN tunnel Comment by Brano February 2021

Brano

Comments