Comments
-
Can i do this over TCP/IP? Asking because i might have misplaced the console cable…..
-
I'm running firmware V1.10(ABZI.1)
-
Thanks Peter, it's seems to be working!
-
I would like to create a secondary interface to my primary static WAN IP on ge1 as a virtual interface. This option is possible on the older Zyxel firewalls. So the command should maybe be something like this: vrf main interface ethernet ge1:1 ipv4 address 192.168.254.1/29 The above gives me an error using ssh. So i guess…
-
Thanks Emily It's works great!
-
That doesn't work - not even with a NAT rule.....
-
I've also set MTU on the WAN interface to 1370
-
I'm running with these settings..... IKEv2 Phase 1 Encryption: AES256 Authentication: SHA1 Diffie-Hellman group: DH14 Lifetime: 86400 Phase 2 Encryption: AES256 Authentication: SHA1 PFS group: None Lifetime: 86400
-
Our customers are just normal users with no technical insight. That's why it's inconvenient to involve them because they ask stupid questions to why this needs to involve them etc. I was able to VPN into one site and doing a FTP transfer in a command prompt - that failed as explained. I was able to do a FTP transfer with…
-
ftp> put c:\nwa110\650ABTG2C0.bin200 PORT command successful226-Could not open data connection to port 49546: Operation timed out226-firmware verifying...226 file damaged!! We also have 2 other customer sites that we can't remote access unless involving customer. Not acceptable! How to solve?
-
UPDATE: Nevermind - the AP i'm testing the Secure WiFi with, is not supported..... I have a Secure WiFi trial "in progress" - activated about 2 hours ago. Don't know if it's related to this incident?
-
It's still an issue, but i guess you know that?
-
Yes, all devices are able to upgrade. Thanks!
-
Did a reboot on one of our customers NSG50 this morning - so yes, the issue still persist. CPU and Memory values in NCC is empty and the NSG50 shows not connected to Nebula.