ESYS_SW 
Freshman Member
Comments
-
im having same issue on usgflex100... what is the resolution?
-
We use PRTG Network monitor with our Zyxel Routers. https://www.paessler.com/bandwidth_monitoring The Free version will allow you to see bandwidth usage. It's all done via SNMP. I wish Zyxel SecurReporter would have similar functionality, but it doesn't. Here's an example. Inbound and outbound traffic are shown as above…
-
You can read more detail on this subject from my post here https://businessforum.zyxel.com/discussion/1324/how-to-route-multiple-public-static-ips-with-zyxel#latest
-
You'll ahve to have at least (2) public IPs. Either you obtain a 2nd static for the WEB RTC server or else you assign the one static you already have to the WEB RTC and let the USG20 grab a DHCP address on it's WAN interface.
-
A single block of 5 should be fine. If you want to assign a public static to .9, .10, .11 respectively, then follow these steps:In cases where the devices behind the Zyxel hold private IPs because they required firewall protection. Typically this method is used when servers are connected behind the Zyxel. Method 1 is 1:1…
