GPane

Was the damn original cable! With that work. I have restored the original cofing and i have change the password. Thanks guys!!!

Hi warwickt, I have the USG40, as i have said at the first post, and that have the ETHERNET console port. So i need 2 cable. One for ETHERNET to SERIAL and one for SERIAL to USB... I have try different SERIAL to USB and a couple ETHERNET to SERIAL, black screen. Probably, the console cable is different for this model.…

Yes i have installed. I see COM 3, i set the speed to both part (Teraterm and Windows) but none. Today i'll try with the original cable, i'll hope it will work...

I don't have the original cable… I have try 3 different RS232 --> USB and 2 different RS232 --> LAN, nothing always black screen. Maybe i can find it to another friend of mine, monday I'll hope is the cable… i need that config P.S. There isn't any documentation about the cable? Color scheme? Or a place to buy?

Can't connect using the cable! I have set the specific from the manual 115200 8 None 1 None But i see only black screen, not the login window! Plase help... EDIT: I have set the same specific for the COM inside driver... EDIT: I have try also to reboot, nothing...

Hi, Thanks for the help warwickt, I don't know if there are "backup.conf", how i can check it the file exist before reset? You have write "as soon as you acceee your USG110 with user/password" i don't have it and if i reset there is a chance i'll loose everything? I don't know if the firmware is recent, Zyxel_Charlie i…