Gothmog

Colleagues, it seems to be unrelated to at least the VPN100. We tested yesterday with the Zyxel router and a different VPN and the problem persisted. So, it's either something with the Zyxel router in bridge mode or one or the other underlying service provider (peoplephone, cyberlink, swisscom) is throttling our upspeed,…

hello mMontana. Yes all set correctly, and as said, download speed is correct. It's the upload speed thats only 1/40 of what it should be. An IT specialist was supposed to check in with me yesterday but we had to postpone that to Monday. Lets see, maybe it's a hardware problem. Thanks so far for your input, which I…

Hello mMontana, My interface is a PPPoE connection, the necessary VLAN (11) is set on the router (I have had it set on the VPN before, both work, but there is no difference to the too slow upspeed). The physical WAN port used is number two and these are the WAN settings. The numbers differ significantly from yours.…

Hello jasailafan and thanks for your somehow funny proposal. I tried this just now, but it doesnt make any difference, here a new screenshot. it's the upspeed thats the problem. and one would expect that the the zyxel devices would be compatible with each other. but well... tomorrow, a technician will replace the router,…

Dear all, This is all default, WAN1 is on Auto Negotiate and Status is 100M/Full which is correct. Here a speedtest of the lan showing way too slow upspeed. The graph always look similiar, it peaks at the beginning an then gets throttled in one way or the other. I have also tried overwritting the interface its MAC address…

Hello mMontana and thanks for your reply. No, CPU usage of the VPN is below 10 % and has never really gotten higher than 10 % as per the day chart I am looking at now. Also RAM usage is of no issue here. I will have to check the router but do not have those credentials at hand, will check tomorrow. thanks for the…

Thanks so much Kevin, I will give it a try! Greatly appreciated.

could you point me at the correct 1GB version of the same? I have no clue about wavelength. This one is the working one when I use the router in between: Zyxel PM7000-00 XGSPON SFP+ Type SFU Thanks! 

thanks Kevin, i guess here's the culprit. what works in the router won't in the vpn. I was using the routers 10G sfp+ module, my bad! appreciated!