Horia  Freshman Member

@Zyxel_Stanley Thank you! I use Firefox 56. I tested it with another browser (Opera 39) and it works fine. I did not thought of the browser, sorry for ringing the bells without reason.

@Zyxel_Stanley I upgraded to firmware 4.32 (by first upgrading to 4.30 as the PDF documentation of the 4.32 version was asking me to do). Now the wifi is working practically with equal speed as the LAN (download speeds both over LAN and wifi are equal, around 15 Mbps, which is almost the local speed of the provider - 16…

@Zyxel_Stanley Thank you for your detailed reply! Yes, I observed that the cheaper zyxel APs do not have 5Ghz bands, but I prefer to buy two of them, as they are only about 30€ each, and to put them on two different levels of the house, so I have in the end three radio senders for wifi (the main one, from the USG40W and…

@Zyxel_Stanley Ok, fine! But then why we have here instructions of how to use a setting in the software, that is in reality not available, or not legal to use? I read a few other similar forum discussions, all of them are talking about a meniu point in the firmware that in fact does not exist, at least not when I buy the…

Thank you, @Zyxel_Stanley ! I will try the firmware. If it goes wrong, can I still downgrade to the old software? (4.25) With the APs, we want to stay in a small budget. So I found the AP called NWA5301-NJ or NWA5121-N, which would fit our budget. Question: can these APs use normal power from a plug, or is it mandatory to…

@Zyxel_Stanley Thanks a lot for your answer! I already had extended the Session Limit from about 2000 (standard setting) to 6000. So this should not be a problem. I will add the DNS. The main problem is one of hardware, I'm afraid! as I wrote, there is a lag in the wireless communication only (not in the LAN)), solely…

@Zyxel_Charlie I have also trouble with wifi and an USG40W. In the 4.25 version of the firmware, I have the same problem: no country codes indicated there... thanks in advance for your help!

Hi Stanley, I have the following problems with the WiFi of my USG40W: - there is an important lag in the wifi connection, showed by TTL times of up to 100ms and package losses, every few seconds happening. If they do not happen, the times are normal (1-4ms). Sometimes I have also no ping response (timeouts when pinging,…

Thank you, @Zyxel_Stanley ! I will revert with all necessary details, in about two days, when I will have again access to the firewall.

@Stanley, thanks a lot! I am going through them. I have another problem now: users can connect to the internet, but the connection is slow, or drops, and it feels like the range of the USG40W is weaker and smallet than the normal local internet wireless modem, located in the same place (which has not two antennas and is…

Hi Mark! thank you very much for your fast reply! I will use this info in case the acces will not work well! Please tell me, where is the menu for the policy control? (sorry for the stupid question...)

in the meantime, the WiFi works! I do not know at all why. I just restarted the USG40W, and nothing else.

@Zyxel_Charlie Thank you a lot! I will send you the logfile, etc. as requested. However, in the meantime, the SecuExtender is working again, without explanation. I restarted once the computer, and otherwise noting changed...

Ok, this seems to be different. But what happens if you try to login with whatever username you have there? The handbook says you should now not be able to access the zyxel settings anymore, with none of the existing users. Also, you have to check how your WAN "object" and addresses are exactly configured. (Did you ever…

yes, that's correct. At least in my case it works, as I already described it. Just try it for yourself and you can then check your domain (or WAN IP address) by using the website I indicated here above