Humble

Ok, so the VLAN trunking setting in the VLAN port configuration only applies to unknown VLAN's. The Static VLAN configuration setup applies to known VLAN's, and there we have 2 parameters: (1) Control: - normal - the VLAN is added when the other side registers it with GVRP - fixed - the VLAN is always added to the port, so…

Hi Melen, a quick question before I go into a meeting. What happens if I enable trunking AND I create the VLAN's? this is what I had configured before. However I had the untagged VLAN (PVID value) on port 11 and 12 configured on VLAN10, as I wanted a way to connect a management device to that network.

Hi Melen, thank you for your reply. The Fortigate has the 10Gbit interfaces configured on separate soft-switches. the first 10Gbit interface is configured natively in a single soft switch, and only carries the untagged traffic (untagged VLAN1). The 2nd 10Gbit interface is configured with the VLAN's which are all…

Hi, somehow I ended up in this thread trying to find out how I could properly configure my XS1930-12. I have tried to register with a number of other zyxel support platforms, but they seem to fail on me. mostly because I can't get any technical information. My setup is rather simple, I have a Fortigate 100F firewall with…