IctPk

Comments

  • Thank you very much James for all your time helping me remotely with the configuration of the Zyxel Flex 200. I am so glad you found out that the SNAT setting on both WAN connections were turned off. After changing this setting, internet traffic could flow again. Problem solved. Thanks a million, regards, Danny
  • Dear James, Tonight I spend another 4 (!) hours trying to get the Flex 200 to work. I have never had such a problem with Nebula devices. We choose Nebula, because it is always (almost) plug and play, zero touch. Tonight i succeeded to get the Flex 200 connected to Nebula. It automatically downloaded the LAN configuration,…
  • Dear james, I have deleted the Flex 200 from the site, and even from the organisation. Than I have added the device again (with serial number and mac address). How can I now pre configure it? It seems to me that there is no option to configure the settings, if the device is not already assigned to a Site? I can not find a…
  • Dear James, I am sorry to tell you that I had to look up the difference between "on premise" and Cloud mode. We are using cloud mode. As I approach it: I unbox the device. I add the device to Nebula cloud (scan the QR code). Assign it to the right nebula Site. Tweak the settings in nebula cloud for the firewall. Than I…
  • Dear James, Thank you very much for your help. You are right, the device is assigned to the correct site. But I understand from your answer, that a new device can only connect to Nebula if devices are un assigned? Why is this? I will try after working time. Since I do not want to disturb the network right now. I have setup…
Default Avatar