Iraklizh  Freshman Member

Remember that ip address pool for L2TP VPN users can not conflict with any subnet of usg40w and the remote router this i didnt anderstand. i have subnet(192.168.1.0/24 at office) if i use different subnet to connect vpn clients, how they connect terminal server at target subnet 192.168.1.0/24? I did many times before…

Actually usg 40w is office network, and remote routers( i mean when users from office are at home and via vpn they only need to connect to internal network and use rdp, at the same they can use their own internet at home as thay want. for me is not necessary to use office rules, when they brouse internet at home. But if…

also do i need to swich on gre protoclo (i mean enable checkbox?)

And what i cannot understand... actually our home isp prowiders (Both of them)made homr touters to accept client dhcp like 192.168.1.0 or 192.168.0.1 networks for klients... Must I change their internal addressing at home? to coonnect to Zixel vpn subnett, where i use same addressing (for example 192,168.1.0/24) Steel…

ok, thanks, will try this article.

i can now ping default gateway on the remote subnet, and when i go to internet, i can go there via remote public ip. all this ok, but my issue to access to rdp server in this remote network. The address of remote network rdp server is 192.168.1.200 and when i connected by l2tp vpn i cannot ping it also other devices…

And i sow in monitor that my computer connected by l2tp, user logged, and ip address assigned (192.168.2.1), but my remote subnet has 192.168.1.0/24 network and remote device there is 192.168.1.200. If i made L2TP_VPN_Range addresses fro 192.168.1.220-1.230 situation is same. what i do wrong? i cannot understand. sorry.…

I made it both for my computer and my user account :(, i will try to resolve it, but what is happened next, i tried to set up l2tp vpn. user connects by l2tp vpn, connection is established, but i again have not access to remote network resources, like i cannot ping any remote machines there by their addreess

Steel read and watched manuals about how to establish connections with IKEv2 vpn and usg 40, but now it does not connected any more and only what can i see is IKE autentification credentials are unacceptable. what is wrong? watched zixel's videomanual from here https://www.youtube.com/watch?v=xvl346kttys .... cannot…