JS87  Freshman Member

Comments

  • Thank you very much! But wouldn't it been better, when the next firmware realise there are SFP+ modules active and then prophylactically turns the fans a lil bit more, instead of that switching between some values from real time information? At the moment it's switching between 5600 and 5900 which aren't annoying values…
    in USG Flex 700h - Fans/Temp Management Comment by JS87 November 14
  • Now you can hear it in the YT-video At the moment of filming, it were 22°C and still 45% humidity
    in USG Flex 700h - Fans/Temp Management Comment by JS87 November 8
  • I was able to track it now with the CLI: usgflex700h> cmd fan-get Sensors[0]:45 degress C Sensors[1]:40 degress C Sensors[2]:54 degress C FAN[0]:2728 RPM FAN[1]:0 RPM FAN[2]:7769 RPM FAN[3]:0 RPM usgflex700h> cmd fan-get Sensors[0]:46 degress C Sensors[1]:40 degress C Sensors[2]:55 degress C FAN[0]:2597 RPM FAN[1]:0 RPM…
    in USG Flex 700h - Fans/Temp Management Comment by JS87 November 8
  • Hi Kay! Thanks for your reply! When I came home after work, I turned on several more devices and the CPU went up to 14% and since then, the fan stays the same :/. So I guess the values don't matter at the moment: It is the latest V1.30(ABZI.0) Sensors[0]:45 degress C Sensors[1]:40 degress C Sensors[2]:54 degress C…
    in USG Flex 700h - Fans/Temp Management Comment by JS87 November 8
  • Thank you very much for the USG flex 700H! That's all we wanted! 😍
    in Upgrade to 10Gb/s Network Comment by JS87 November 6
  • Hey @Zyxel_Melen Any Idea?
    in Factory Reset of GS1920-48 results in GS1900-HP firmware load. Comment by JS87 April 2023
  • Its not SCXXXXXXXBC. It is 5CXXXXXXXBC and matches the MAC-Address range of the switch in your screenshots from the WebGUI. The serialnumber is very blurry. It is the label over the MAC-addresses. The beginning matches with your WebGUI screenshot: S14… Found your thread on reddit and hope you find answers because thats…
    in Factory Reset of GS1920-48 results in GS1900-HP firmware load. Comment by JS87 March 2023
  • Hey Jeff Thanks for your reply. Nope… 1Gb/s SFP is already in use with the Zyxel ATP100 for some years, but the change to a 10Gb/s (home) network isn't that special in 2023. So to summarize it all: The only Zyxel Firewall with a SFP+ interface is the USG2200 for around 10'000$. EDIT: And with the upcoming devices, only the…
    in Upgrade to 10Gb/s Network Comment by JS87 March 2023
  • Yeah… I should say, that this was of course, all ATP features were activated. All my fault. Sorry for the late response
    in ATP100: SFP/Modem little bit slow? Comment by JS87 March 2023
  • A centralized solution!
    in Community Appreciation Week – Get a 30% discount for license purchase! Comment by JS87 April 2021
  • Yes... Fiber-cable with SFP/miniGBIC from the wall-socket into the modem. From the modem with Ethernet (copper) into the WAN of the ATP100. Speed: 650-700Mb/s Fiber-cable with SFP/miniGBIC from the wall-socket into the SFP-slot of the ATP100. Speed: 400-500Mb/s Firmware is V4.60(ABPS.0). EDIT: Perhaps I should add, that I…
    in ATP100: SFP/Modem little bit slow? Comment by JS87 December 2020
Default Avatar
EnglishTiếng ViệtРусскийไทย中文（台灣）