Jenz — Zyxel Community

I was able to successfully install the firmware. Now I am always shown that there is a new firmware, but this is the “old” 5.39 Update 1 version. Should this be reinstalled or is the “new” version ok?

in Recovery Steps for USG FLEX/ATP Series Application Patrol Signature Issue (Jan. 2025) Comment by Jenz January 26

"The first mandatory thing you will need is a Console / RS232 cable to start with the recovery. The recovery needs to be done On-Site and is not doable by a Remote Session. It's impossible to recover the device by pushing the Reset button or flash the Firmware by FTP!" Wow… Thanks Zyxel, this is exactly the kind of problem…

in Device error, Wrong CLI command, device timeout or device logout. Comment by Jenz January 24

Did Zyxel produce the same error again as in June 2022?

in Device error, Wrong CLI command, device timeout or device logout. Comment by Jenz January 24

I have the same problem here! I can no longer access the web interface on an ATP200, and the Internet connection is interrupted every 2-3 hours.

in Device error, Wrong CLI command, device timeout or device logout. Comment by Jenz January 24

Thank you for your answer. I have tried it with the 2 routes, but unfortunately it still doesn't work. (changed the IKEv2 IP Range to 192.168.112.10-100) HQ: Ext:

in Site2Site VPN and IKEv2 VPN - No Route to Remote Site Comment by Jenz November 2024

Is there any news on this yet? The middle of January is already over.

in L2TP Ipsec AD login crash on last Firmware Comment by Jenz February 2024

Is it possibly the same problem that is described here?

in USG 110 VPN VPN access with domain users Comment by Jenz January 2024

Is there an approximate date when the new firmware will be available?

in L2TP Ipsec AD login crash on last Firmware Comment by Jenz December 2023

Jenz Freshman Member

Comments