MartinTat

Comments

  • Hy Melen, the bad configuration could be solved by removing it from the site. Ok (Great and easy way instead pushing reset !) After that the before changed network range and the additional added network with an other VLAN worked. The static DHCP table still did not work! I had to clear the whole static DHCP table line by…
    in NCC static DHCP reservation not working Comment by MartinTat January 7
  • Hi Melen, thanks for the quick reply! Support access is enabled. I tested with a Laptop on switch GS1915. Port 8: VLAN31, Port Group1 Port 10: VLAN100, Port Group2 Ip change is working quick and immediately. Even without the need of "ipconfig /renew". But i nocticed as follows: a) Laptop does not geht IP of static DHCP…
    in NCC static DHCP reservation not working Comment by MartinTat January 5
Default Avatar
EnglishTiếng ViệtРусскийไทย中文（台灣）