Moritz_M

Comments

Hi Kay, I was able to connect to the switch via console. But the switch does not accept the default password. I tried again after pressing the reset button for 10 seconds. But the switch doesn't seem to accept the default password. There is no cloud connection, but I still tried the password configured in nebula, but that…

in GS1350-18HP, does not accept DHCP Offer from Meraki Firewall Comment by Moritz_M January 18
Unfortunately the switch does not respond to ping on ip 192.168.1.1. we connected the laptop directly to the switch on Port 18 and configured the LAN interface on the Laptop with 192.168.1.5. No response whatsoever. Any suggestions on the Console connection?

in GS1350-18HP, does not accept DHCP Offer from Meraki Firewall Comment by Moritz_M January 17
Hi Melen, thanks for the reply. The Serial cable arrived today so I tried connecting to the serial port, but the console stays black: I connected the adapter to the switch as depicted below. I also tried cabling the other way round (black on top then green then white and the bottom connector empty). With no result…

in 1920-8HPv2 - SYS LED flashing rapidly. System does not boot Comment by Moritz_M February 2023
Hi Ivan, please find my answers to your questions below in your quote: Since I usually work with other network vendors, I would be very interested in documentation on the console commands available. Is there something like a command reference? Kind regards, Moritz

in 1920-8HPv2 - SYS LED flashing rapidly. System does not boot Comment by Moritz_M January 2023