Nas540U2022  Freshman Member

Hey there Fefe, I think you have to log in via serial to check the screen output, like Mijzelf suggested. I would've never found the solution without that. After you did that, you can follow my steps in the answer to this post.

I'm just guessing here since my 'linux' is not too great, but to me it looks as if the uImage was totally healthy. What was off was the checksum for it, which apparently got changed when it executed the upgrade stick. Since it didn't fit with the installed image barebox thought it was corrupt. This led to my pseudo-bricked…

Thank you again @Mijzelf for your help, would not be at this point if it weren't for you. My NAS is up and running again. My disk were recognized in the first second. Only thing I had to to were turn on link aggregation, add my users and edit the sharing permissions that got deleted/disabled. Here is how I did it:*…

Hello again, yes. I flashed the uImage.521 and used the upgrade key to install a system. I used your files from this directory. After that i used the universal key to get into the system. I mounted /etc/zykel to access the config files.I changed the file sch_starttime, with the little help of this website to something in…

I checked the /etc/config file and it has these two lines in it: The documentation of barebox says the following: and further: Now I don't have the global keyword in barebox, but the two lines in the config are an exact match for the commandline that I got, it could also just be the standard config. Can I just edit that…

I checked the /etc/config file and it has these two lines in it: The documentation of barebox says the following: and further: Now I don't have the global keyword in barebox, but the two lines in the config are an exact match for the commandline that I got. Can I just edit that file and add everything I want?

I gave up. I deleted everything in /etc/zyxel, after that I was able to boot without errors.Logged into the web interface, did the latest firmware upgrade and tomorrow I'll put my disks back in. Ty for your support. I will write how I did the flashing, but for now I'm too tired. Have to stand up for work in about 5 hours ;)

Hello again, yes. I flashed the uImage.521 and used the upgrade key to install a system. I used your files from this directory. After that i used the universal key to get into the system. I mounted /etc/zykel to access the config files.I changed the file sch_starttime, with the little help of this website to something in…

I know what this is. I turned this feature on last year, which reboots the box every Monday morning a 4 o'clock. I guess there is a bug in the firmware, where it's not able to calculate and update the timestamp for the next reboot... can I turn this of via command line? Has probably to do with the new year.

I answered here an tried to edit the post later, then it told me my comment is waiting for approval...So here we go again, in a shorter version:I tried to upload a file "boot_and_loop.txt" but this failed. What is interesting in that file is the following part: the ipc_send part seems to be pretty standard and might be the…

Okay. So I was able to boot the kernel now and actually perform the usb recovery operation, just so it failed again. Seems something is off about the upgradekey. Well, now I'm back to my original bootloop... What I did to get back:I had to edit the /env/config with "edit".Line 11: eth0.serverip="192.168.188.100" <- this is…

I think the original interval was shorter, but I could be wrong, didn't time it.SoC is warm, can put my finger on the cooler and keep it there.That could be a possibility, maybe left the system with only have the data, though it didn't reboot after the running the upgrade, but turned off completely. I turned it back on…

Well it boots and sits there after calling dhcp if I don't press anything. It's not turning off or resetting after this point. Only if I anykey into barebox shell it's resetting after these 3 minutes.The SoC is warm, I can keep my finger on the cooler, so I don't think it's overheating. The case is completely gone right…

Is there a way to stop barebox from rebooting all the time? It feels like it's on a timeout of 3 minutes.I can type in commands but at some point it just reboots, so I have to type fast... I could read out the smart values in another pc, but I don't want to hook up the disks right now. They got hot because they were spun…

Hi Mijzelf, thank you for looking into this.After the whole boot process ran through it did a reboot and well, it went back to square one.I provided a logfile of the boot process. I see a lot of errors and warnings in there, don't know though if those are normal or not. I thought that the nand might be dead, when I saw the…