Comments
-
Are you sure the NWA50 access points get a 1000Mbps network connection? The speed you tell them giving your client suggests that maybe the wired network connection between your access points and the router / switch is only 100Mbps?
-
Hi, Thanks for the great idea. Will use this on firewalls that have two or more WAN ports. Unfortunatelly we have to send out some Flexx 100 firewalls and they don't have the possibility to use another WAN-port. I will make a new network in our lab and spoof the static ip this way.
-
Hi, They are mostly with static public IP-addresses. Some are with DHCP and that is easy to setup in advance.
-
Hi, Yes I know how the WAN settings are done through the local interface. However doesn't the firewall default to last known good WAN configuration if it can not get an Internet connection after the changes? The problem here is that I am not going to visit the sites where these firewalls are going to be sent. I am…
-
Thanks for your advice. Do I also need to enable the Use VPN check box under Site-to-Site VPN for the 192.168.3.0 network?
-
I tested some more and it seems that all of the internet traffic on the computer connecting through L2TP is routed through the L2TP tunnel. Is this correct?
