Sapphire23  Freshman Member

You can set a temporary NAT rule from wanIP to server Create ICMP service and it's group Create NAT rule

You mean you want to allow ping from WAN to your internal server? What is network topology?

You can click unpair on mycloud.zyxel.com

Where did you find that menu?

What's your NAS's model and where's that menu?

Which netatmo device you have? Do the other host also disconnect when your netatmo disconnects? Here's the advanced troubleshooting guide for netamo https://helpcenter.netatmo.com/en-us/smart-home-weather-station-and-accessories/connection-wi-fi-radio/advanced-network-troubleshooting-guide In troubleshooting guide it says…

You can make configuration backup in control panel and restore back later on

Looks like you misconfigured your volumes. I assume you enabled your NAS's SSH. First SSH to your NAS and find /i-data/ path. Execute ls and find your volume names, then execute this command to move content first mv /i-data/sysvol/* /i-data/targetVolumeID/ After that remove the hard drive with the files and create your…

If you want to upgrade your current NAS I recommend you using NAS542. it supports RAID6 and powerful compare to olders.

Looks like you have changed your NAS's content when looking at https://community.zyxel.com/en/discussion/11070/repository-not-visible-in-nsa325-v2-fw-4-81#latest thread. Probably that's the reason why you can't connect to mycloud.zyxel. But maybe you can make port forwarding to your NAS from your main router and create…

You can find your SN and MAC at the bottom of your NAS326's labels.

Map your NAS to your PC as a drive it's easier for accessing the files. Here is a similar topic: https://community.zyxel.com/en/discussion/11248/nsa-220-firmware#latest

It's hard to find that old NAS's firmware but you can try map it into Win10. Find "Map Network Drive" in "This PC" and login your NAS's credentials.

AFAIK you can't update php to v7x on NAS326, but you can install WordPress from the packages.

How did you solve the issue?