Comments
-
Alright so I wanted to document this here in case anyone else runs into this issue like me. I flashed OpenWRT onto this access point because the stock GUI was not intuitive and the instructions were written rather poorly. After flashing OpenWRT (btw this took forever), I noticed wifi speeds were reduced by about 50% so I…
-
No dice. Here is the bug i run into. => atna 192.168.1.10 => atns 192.168.1.20 => atnz 629ABYW4C0.bin Using eth@1e100000 device TFTP from server 192.168.1.20; our IP address is 192.168.1.10 Filename '629ABYW4C0.bin'. Load address: 0x83000000 Loading: * ARP Retry count exceeded; starting again
-
This is now where I'm at when trying to flash a new firmware. => atnf openwrt-initramfs.bin => atna 192.168.1.10 => atns "192.168.1.20; tftpboot; bootm" Using eth@1e100000 device TFTP from server 192.168.1.20; our IP address is 192.168.1.10 Filename 'openwrt-initramfs.bin'. Load address: 0x83000000 Loading: * ARP Retry…
-
Hey Melen, I responded to your PM. I do have the NWA50AX which has a 4 pin console port. That's how I was able to communicate and get the dialogue listed above.
