Sumpfstrauch

Thanks, Melen! It's working now! On GS1900-24E, LACP has to be enabled on two places: In global LAG options and in the config of the concrete LAG. I missed the first one. :-) Summary: LAG is working between GS1900-24E and OPNSense router working also with only one member port in the LAG (I used this setup for smooth…

Hi all, hi Melen, hi /me, the LAG with only one member port is working now with GS1900-24E and OPNSense router. The clue has been to reboot OPNSense when changing LAG settings, in my case when switching between LACP and static. Just applying the settings didn't work for me. My status: link is working with static LAG…

Do I understand you correctly that in case of "As Native VLAN" enabled, the PVID of UPLINK is equal to Management VLAN ID (Answer to Question 1 is Variant 3) and that this VLAN also is untagged (Answer to Question 2 is Variant 2). Why are you naming the port "AP Ethernet Port"? Do you want to say that this behaviour…

(Sorry for the multiple posts, should not be normal case. Evertime I put together both questions into one post, the post was ignored by the forum.)

Question 2: In which case are untagged frames emitted on UPLINK? Variant 1: never - all frames on UPLINK are tagged always Variant 2: all PVID frames are untagged (PVID according to question 1) Variant 3: Something different which I don't know 😊 Can you answer these two questions or guide me to the answer? Thank you much!!…

Question 1: What happens with untagged incoming frames (what is the PVID of UPLINK)? Variant 1: untagged frames are dropped Variant 2: PVID of UPLINK is always "1" Variant 3: PVID of UPLINK is equal to the management VLAN ID Variant 4: PVID of UPLINK is taken from "lan1" PVID settings

Reading the docs I assume for UPLINK: Incoming: tagged frames are bridged to WLANs and LAN1 corresponding to the WIFI and "lan1" settings Outgoing: WLANs and LAN1 are bridged with tagged frames to UPLINK corresponding to the WIFI and "lan1" settings

Hi Judy, for some reason, the forum ignores my following comment when posting, so I have to split it up. thank you so much for your really quick answer. According to the docs and FAQ I'd also assume that the SW config of "lan1" relates to the config of port "LAN1" only. But that's why I do not understand how port "UPLINK"…

Hi Melen, oh, thank you so much. I have not expected anyone to do concrete testings about that, that's phantastic - thank you. :-) I already did what you wrote, I tried both: With LACP enabled on both ends and with LACP disabled on both ends. But because you are writing that you succeeded in setting up this type of…