Comments
-
The answer should be already in your screenshot~?
-
Have you already configured site-to-site VPN??
-
What about letting the ports of the same room in the same VLAN? EX: port 12,13 use access and pvid 101 port 14,15 use access and pvid 102 uplink port use trunk, pvid 1 and allow all VLAN Then, room 101 will be isolated from room 102 because they aren't in the same VLAN. You also need to add VLAN 101 and 102 on your…
-
In my test is like this:
-
I think you may use application patrol to create a profile for rejecting facebook and apply it in the outbound rule. Therefore, you will have two outbound rule, first one is to allow the specific IP address, second one is apply the profile that blocks facebook traffic.
-
I don't think you need to configure policy route on NSG because LAN interfaces can communicate with each other by default except you enable guest interface for them. If you may ping from LAN1 to LAN2, that should also mean the traffic can cross LANs. Have you tried to capture the packets on LAN2? If you can't capture…
-
Did you configure Outgoing Interface as "Auto" in site-to-site VPN page?
-
@ROM Why your default gateway IP for MGMT VLAN, VLAN 10 and VLAN 100 are all 0.0.0.0??
-
You should be able to find the alert setting in site wide setting.?
-
Why don't you configure the room name on AP's name instead of AP's description?
-
你在路由器上建立好兩個VLAN,並且設定讓兩個VLAN都有DHCP server的功能,然後分別發你想要的IP網段 Switch的部分只要確定VLAN可以通,也就是接AP跟路由器的port都要是兩個VLAN的成員並且tagged out AP的話,把SSID設定成相對應的VLAN就好 以上希望對你有幫助~
-
Hi @steves , I follow your example and I can configure like this without error message:
-
@dpssupport I think you may try to configure IP filtering on your Switch. Destination is your Switch IP address. Dst port is 23. (Because Telnet is using TCP port 23)
-
AP should be auto negotiate by default, and it is normal to be 100M half/duplex when Switch side is force 100M Full/duplex. I think it is probably the cable issue, maybe the cable only support 100M.
-
I test my NSG200 with the CenturyLink's Speedtest, the result is different when I use the speedtest.net. I got normal throughput when I used speedtest.net but had lower speed using CenturyLink's Speedtest. Maybe it is because I am far from the CenturyLink's server Las Vegas.