Zyxel_Ryan  Zyxel Employee

Hi @Dudley_Winchester If your laptop can ping gateway successfully, maybe you can try to set management IP interface of GS1900 on the same VLAN as your laptop to check if GS1900 can ping NTP server in this scenario. Besides, you mentioned that there are many topology change in the environment. Do you have ring topology so…

Hello @bogdan81d GS2200 series does not support the function of showing IP address of users tying to access switches. If you would like to protect your GS2200, I recommend you to use Remote Management to set only certain IP allow to access switch with certain methods. (Web GUI: Management > Access Control > Remote…

Hi @Mike_M If you just need to do some basic settings, I will recommend you to use ZYXEL ZON Utility.(link) ZON can scan different switches in the same broadcast domain an do some basic settings, for example, changing IP address, doing firmware upgrade. The software looks like: If you will need more advanced setting on…

Hello @bogdan81d What is your firmware version of GS2210-8? I tried with latest firmware - V4.50 patch 2. In the log, no matter the logging is failed or successful, IP will be printed. GS2210# show logging page 1 Jan 01 00:03:42 NO authentication: HTTP(s) authentication failure [username: 1234, IP address = 10.214.60.89] 2…

Hi @Alex, We usually set ports connected with end-devices (For example, your PC) Untagged because end-devices usually cannot recognized tagged packets. Tagged out setting is usually used when ports connected with another switches and you want packets to be sent to certain VLAN so that you need tagged out. Ryan

Hi @Philippe I would like to remind you that if you change fan by yourself, there might be warranty concern. Therefore, we do not recommend you to do that. Ryan

Hello @Rudolf Yes, I think USG20W-VPN is a good idea. The general setting concept will be like below: * lan1: Local Network and Workstation. * Block lan1 to wan with IP of Workstation so that workstation will not be able to access internet, but only to local network. * Bind Guest WiFi on lan2. * Block lan1 to lan2 and also…

Hi @Dudley_Winchester I did a test with my GS1900-8 (V2.40(AAHH.1)C0) based on your setting in the description, but everything works fine. I can ping NTP server (uk.pool.ntp.org) and sync time with SNTP normally. Please refer below. Static IP setting: Ping NTP server: I can use domain name in SNTP server: Can you also do…

Hello @Philippe Welcome to ZYXEL community! Regarding your question, fan speed of GS1900-24HP remains constant in our design. It is a normal behavior of GS1900-24HP. Please feel free to use it. If you have further concern, welcome to discuss with us. Ryan

Hi @switch Thanks for your sharing! We have noticed that there might be method of making certificate as you did on GS1900. Due to this is not a formal feature on GS1900, we can not guarantee the performance of it. Therefore, we do not recommend users to use it. As mentioned in the previous discussion, this feature will be…

Hi guys, Thanks for @Daniel_LU 's suggestion. I would like to ask @Rudolf How many clients do you have in Local Network and Guest-WiFi, respectively? Besides, how large will your wireless network be? Ryan

Hi Brad, If you find that the original two GS1910 in WarehouseComm works fine, while two GS1920 substituted do not, I think it is most likely some configuration errors on GS1920. Please PM me the configuration of 2 x GS1920 and 2 x GS1910 so that I can compare the configuration for you. Furthermore, please also give me the…

Hi @bradg First of all, for clarifying your question, it will be the best way if you are able to give us your application in detail and full network schematic. From the description you mentioned, I assume your topology below. If I misunderstand, please let me know. Secondly, I would like to remind you that both GS1910 and…

Hi @danyedinak Based on your description, I assume your topology looks like below. If not, please let me know it more clearly. Port Enable/ Disable setting and PoE Enable/ Disable setting are actually two different settings. Port Enable/ Disable setting: Configuration > Port > Port > State PoE Enable/ Disable…

Hi @B1ggJoe According to your topology, I will recommend you to set VLANs below. 1. For ports connected with APs and Gateway, set ports as Tagged. For example, if the port 2 connects with AP, port 2 should be Tagged in VLAN 1, 2, 3 because AP contains these 3 VLANs. 2. For ports connected with end-devices, set ports as…