ahorner  Ally Member

The app shows 7, but I'm not referring to the app when I say 6E, I'm referring to the system status icon on the status bar of my device as my S22 Ultra only supports a maximum of 6E, no support for 7.

Hi there, Both SSIDs are visible in this configuration and both can be used successfully, however the SSID which includes 6GHz only appears as WiFi 6 most of the time. On occasion, it will show 6E, but this does not last too long. Additionally, when using a WiFi analysis app, the 2.4 and 5GHz SSIDs show all of the time,…

No, it doesn't even use it at all. As far as it's concerned there's no E to the 6. I'm using WiFi Analyser to monitor the presence of the 6GHz signal, and every few seconds it is appearing and disappearing. I've used a couple of different apps and they show the same behaviour.

S22 Ultra - unfortunately I don't have another device to test with but I have used 6E without trouble before

It appears to exhibit the same behaviour, however if I catch it when it appears and connect, it does remain connected. Almost as if there is some kind of beaconing issue.. but that doesn't explain why 6E doesn't work once I'm connected to the other two radios successfully.

Hi @Zyxel_Nami, The models I have tested are: TP Link TL-SG105E (limited functionality) TP Link TL-SG108E (limited functionality) Netgear SG308E (dynamic based rather than static) These aren't great either, and a better implementation would of course be explicitly setting a port to Trunk, but it is better than nothing

Hey there @Zyxel_Nami Here are some examples of people asking for trunking for this switch: Trunking is a really important feature on any 802.1Q switch, even for the home and SOHO user who would have the need to use VLANs in the first place. Having to configure each incoming VLAN increases the complexity of an…

Hi there @Zyxel_Nami, I am appearing again to ask one more time about VLAN trunking. These switches are currently being marketed towards businesses with IP phones and USGs. If VLAN trunking can be added to the GS1200-5 and GS1200-8 with a firmware update, this as far as I can see would make ZyXEL the only company on the…

Hi Nami, It is a shame the 1200 will not support VLAN Trunk. Is it something the team would ever consider? Even the 8 port 1900 series is bigger than I need on my workbench as it has a bigger footprint than the 1200, and the only reason I would find trunking useful would be to get another 1200 and trunk all VLANs from my…

Hi Nami, Indeed, I do understand the implementation myself, it just might be good to note this in the web interface for additional clarity for those people who are less familiar with the concept of VLANs. I hope you don't mind, but I do actually have a couple more things which I discovered only yesterday: It does not seem…

Hi Nami, Thank you for raising the LED suggestion, and for raising the timeout issue with your internal department, I do not want to cause too much confusion with the VLAN configuration, but basically what I am saying is the following configuration: In this configuration: Ports 1-8 will have untagged ingress and egress for…

Hi Nami, I appreciate the expectation of the device being placed behind a firewall. I suppose that if the device is placed on a WAN for any reason, the ability to change the management interfave VID would be enough to prevent web UI access from the WAN side, so this is fair enough. The 5 minute timeout, I understand this…