Comments
-
Works after having updated the AP's firmware on the USG60 as pointed out by Zyxel_Bella. Many thanks!
-
Many thanks @Zyxel_Bella The description of the situation is correct. I would add that I have two WAX610D but I have only added one of them so far. Maybe I should try with the other one and see if that works? Here is from the USG60: Router> show capwap ap info Online mgnt ap: 0 Offline mgnt ap: 1 Un-mgnt ap: 0 Station : 0…
-
To give an overview the setup consists of:- One USG60 which since the beginning has been controlling two APs - The setup used to consist of two NWA5123-NI - overdue to replace but was working ok and are now removed - I am working to add two WAX610D. One is connected and running via POE so far but since I couldn't configure…
-
@PeterUK Yes that part looks correct. I used to have two NWA5123-XX but now then upgrading to two new APs so the SSID etc. is already setup. I checked so the new AP is part of the group and I have removed the old APs. At the moment I have only mounted one new AP. It is like the USG60 sees the AP but doesn't want/cannot…
-
Thanks for the feedback. It does show up but I cannot adjust any settings: Maybe a matter of RTFM..? :)
