Comments
-
Hi. Noticed that the backup funktion is gone to, I guss that is a package I installed once to. Can I found this packages some ware? The backup function I'd liked to get back.
-
"You created the array on both disks from the beginning?" Yes. But I had tried to use them together with the original disk to build up raid1 with two new disks as the manual say (replays first one old then the other when the raid1 i rebuilt). That operation looked ok until I rebooted the nas as i described earlier. So I…
-
Its me again. I decided to buy two (WD red 4Tb)new disks for the nas and continue to use it. I experienced the same issue as in: So I decided to start over with both new disks. I deleted the volume and create a new raid1 volume from the beginning. I still have the two original disks with the data and a new usb backup after…
-
Yesterday I did the 2 second reset after I pulled out the two internal disks (raid1). Then I could login to the admin gui with the default password. I then restored an backup of the config and every thing sill worked and my old config was back. So I put back one of the disks and vola! I could access the files as before. I…
-
Still the same with the disk disconnected. The usb disk has separate power. Still have the same when I removed the internal disks. But trying with a new power supply could still be a good thing to do I guess.
-
[quote]Have you tried to access the NAS without the USB disk connected?[/quote] Thanks for your answer. Yes, I disconnected it but still the same. But there was one difference thou, the nas did not shut down using the power button when the usb drive was connected.
