kaNe  Freshman Member

I did not get any info about the files being copied, but the Disk got fuller and fuller in the WEB-UI. I have all the data back, tomorrow i am picking up a external HDD to have a Backup! Thank you soo much for your help!!!! Do you work for Zyxel or get any compensation for your work here?

Ok, i executed all the commands and it sounds like the HDDs are working. I should get some info in the Command-Window at some point? Will it tell me, when it is finished? 

~ # mdadm --stop /dev/md1 mdadm: stopped /dev/md1 ~ # losetup -o 1048576 /dev/loop1 /dev/sdb2 ~ # mkdir /mnt/mountpoint ~ # mount -o ro /dev/loop1 /mnt/mountpoint ~ # ~ # cat /proc/mounts | grep /dev/md0 /dev/md0 /i-data/d765169d ext4 rw,noatime,barrier=0,data=writeback,usrquota 0 0 /dev/md0 /usr/local/zy-pkgs ext4…

Ok, i have both disks in, the new 4 TB-Disk is in Slot 1 and the old 3 TB-Disk is in slot 2. Next i checked the Name and if there was a MD-Device. ~ # cat /proc/partitions major minor #blocks name 7 0 143360 loop0 8 0 3907018584 sda 8 1 498688 sda1 8 2 3906518016 sda2 31 0 1024 mtdblock0 8 16 2930266584 sdb 8 17 498688…

Whatever will make the Data expressible again! Would it work just like that or do i have to change things about the Filesystem, once its copied? Could you point me in the direction where i would find a tutorial for that? Do i have to do it over the WEB-UI or Telnet? If you could help me, that would be a blast!

I used the commands and get the following output: ~ # mdadm --stop /dev/md0 mdadm: stopped /dev/md0 ~ # losetup -o 1048576 /dev/loop1 /dev/sda2 ~ # e2fsck.new -f /dev/loop1 e2fsck 1.41.14 (22-Dec-2010) Pass 1: Checking inodes, blocks, and sizes pass 2: Checking directory structure Pass 3: Checking directory…

Ok, so here is my hole story: In my Zyxel NSA 325v2 i have a 3TB HDD in Slot 2. It has been in there for 4 Years. I only make Backups of the important data that i have on the HDD, not of all the big files. I wanted to change that and make a RAID 1, so i would have somewhat of a Backup if one HDD failed. So i bought a 4TB…

Thank you so much for your help! i tried it but i get the following results: BusyBox v1.17.2 (2017-06-23 10:40:08 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # mdadm --stop /dev/md0 mdadm: stopped /dev/md0 ~ # e2fsck.new -f /dev/sda2 e2fsck 1.41.14 (22-Dec-2010) e2fsck.new: Superblock invalid,…

Hello, i have the same problem after installing a second HDD to my NSA 325 V2. I am trying to resize the inner filesystem but i have the following problem: I do not know which commands to use. I have little experience with this stuff and i managed to login via telnet but am lost from here. I do not know what device-name to…