katas  Freshman Member

As far as I know Twonky cannot change sorting from NAS542's web interface.

I see there has new firmware released.

As far as i know, iSCSI is not a sharing protocol. A target can have one or more LUNs, and you can have more than one target, a LUN can only have one and only one target. https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=015215&lang=EN…

https://education.zyxel.com/newsletter/published/phaseout/phaseout.htm This product has phased out a long time. I think you only can use it on Windows.

As far as I know, it depends on Share Publish and it cannot set privileges.

Can you share the way about "deleting the file-level database"?

Don't know. What else can I do? :s

Thank you for your reply. @Mijzelf I still have the problem after tried to assemble my NAS540 via command. # mdadm --assemble /dev/md2 /dev/sd[abcd]3 mdadm: Failed to restore critical section for reshape, sorry. Possibly you needed to specify the --backup-file What should I do next? Do you know what would be the locations…

I encountered the similar problem on my NAS540 with RAID 6. Can somebody help me to solve it? # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md1 : active raid1 sda2[0] sdc2[5] sdd2[6] sdb2[4] 1998784 blocks super 1.2 [4/4] [UUUU] md0 : active raid1 sda1[0] sdc1[5] sdd1[6]…