merasil

Comments

  • @Zyxel_Nami any News regarding an official Release Firmware? greetings
  • Hi @Zyxel_Nami, of course. Please note, however, that it is not only about device management, but also about communication with devices connected to the AP, as rvalle and I have found out. The problem seems to be basically with inter-VLAN communication when the start point and end point is on the AP (and the devices…
  • Hi @Zyxel_Nami, @rvalle, thx for your contribution! I also did some more testing and came to the same conclusion. It seems, that also the rate of which tcp packets gets transmitted does affect the error count. If i just connect via ssh and do nothing. I dont get any disconnects. If i open up nano/vi and start scrolling by…
  • Hi @Zyxel_Nami, I seem to have found more problems. Maybe these are related to my original problem. It concerns the NWA50AX Pro again. I have assigned different VLANs to my SSIDs on the NWA50AX Pro. A Raspberry Pi zero 2 W is connected to the NWA50AX Pro and the SSID that is in VLAN 23 (172.23.0.0/24). Today I wanted to…
  • Hello @Zyxel_Nami, I have made screen captures of my logins and a few clicks on the web interface. You can see quite clearly that when connecting directly to the NWA50AX via wifi, both the dashboard and the AP management page are very slow. Via LAN or the 55AXE, on the other hand, it is very fast. In the video I also show…
  • Hi Nami, the SSIDs are the same, but the config is slightly different. I don't need some networks at the location where the 55AXE is connected. Both APs have the latest firmware for the corresponding model. NWA50AX Pro: V6.65(1) NWA55AXE: V6.29(3) I have attached the configs, but removed the PSKs and users/passwords. (BTW…
Default Avatar