mik256

And after reboot, the tunnel connects instantly again: 63 11.04.2024 10:26 info IKE Tunnel [mKerioIKEv1:mKerioVPN:0xc77fb2c7] built successfully 192.168.255.6:4500 StrongSwanPublicIP:4500 IKE_LOG 64 11.04.2024 10:26 info IKE [ESP aes-cbc|hmac-sha1-96][SPI 0x8cdfb2f6|0xc77fb2c7][Lifetime 3180] 192.168.255.6:4500…

I have been playing with lifetime for a few weeks now. Trying different combinations on both ends (equal, higher/lower on one side)..

Hello, there are many working tunnels on strongswan side, so it's a bit hard do distinguish what belongs to the problematic zyxel one. However, I was able to dig these from unsuccessful reconnection attempt. Strangely, I can't see the Send:[ID][HASH][NOTIFY:INITIAL_CONTACT] 192.168.255.6:4500 strongSwanPublicIP:4500 in…

Applying for Nebula Pro Pack Trial did not change anything..

So I gave up and unboxed another usg 50 device. This time, I was able to connect to 192.168.1.1. However, nebula cloud option management is still not working - I can see in licensing the following: Organization type:Base Pack NCC license:Device(s) expired or unlicensed.Check license issue. Does it mean I have to purchase…

I guess my device is broken. LEDs are blinking as expected, WAN port connected to the internet, LAN port connected to the PC, but PC is not getting IP and setting static IPv4 to 192.168.1.49 does not help reaching Zyxel at 192.168.1.1. And Nebula does not work either- I have added the device into it, and all I can see is…

So the IP should of it should be 192.168.1.1 and DHCP should be working right after unboxing?

No, I plugged my laptop into LAN, received no IP. On top of that, I have just tried with nebula- plugged internet into WAN, register etc. Now, the device seems offline in Nebula, I can't still manage the device :( Could this be some problem with licensing? I remeber when adding the device into Nebula, I unchecked all trial…