newBie_  Freshman Member

Hi, I have the same AP and I can add it using Nebula APP v2.4.0 to my site. Did you click the "Done" on the upper right corner? Just curious about the result, how did you get back to the site page? back page of the android or cancel button? Peace~

Firefox has a unique behavior, after you login to the switch Firefox itself will create a file named "cert9.db" in the Firefox folder. I've read some article that this file is saving the shared key and deleting this file will solve the case. I'm not quite sure it will work because I'm using Edge and no issue, but you can…

Hi, As I know, you need to uncheck the "Enable" then input the static IP address in the IPv4 address field and "Apply". It should solve the problem. Peace~

 Hi @tommy, Looks to me that you haven't found out your GS1900 IP right? AS I've read in the other discussion, you can use ZON utility to discover the IP of the device but must be in the same subnet. And I've tried it you can also use ZON to access the web interface. Give it a try. Peace!

Hi @anon71 , Interesting subject. Sorry for asking but it's a little bit confusing. Do you mean you could access your router's home page from the other computer, but cannot access the switch? If yes, it looks like the switch cannot get a correct IP address or default gateway after changing the settings to dynamic. I think…

Hi Hoffi, As I know GS1100-16 is an unmanaged switch so there is no way to trace any LOG :( If the PWR LED keeps on blinking, means that the device cannot boot up. I think it might be related to a hardware issue, is your device still on warranty service? If yes, it will be better to send the device back to the original…

Hello, As I know, I think you should go on to step 2 now (Advanced Application > VLAN > VLAN Configuration), enter to the created VLAN-s then fixed port 21 & 22. I've configured my GS2210 this way, too pity there is no option to add the trunk group to a specific VLAN. Peace!~ J,

Hello, As I know spanning-tree can support at most 14 devices in a loop. According to your description, I assume that you have 7 devices installed with spanning-tree.So it should be enough for you. Peace.J,

Hi @B1ggJoe, I saw your post so I've made an upgrade on my GS1900-8HP using firmware version 2.40(AAHI.1)C0. Result: 1. Web UI - ok. 2. ZON utility - ok. My procedure is simple: Web UI: 1. Access GS1900-8HP via Web UI > Maintenance > Firmware. 2. I choose the method "HTTP". 3. Image choose "Active". 4. Click…

Hi @B1ggJoe, Based on your description, yes you can configure multiple VLANs on a single port. Please refer to the information below for the settings in my apartment: Note: 1. The router should support multiple VLAN interfaces to achieve the requirements. 2. And configure untagged and PVID to the ports for the end devices…

Hello! I encountered this problem before. The solution is same as @Ryan 's suggestion. The problem came out to be my mis-setting of DNS server. :P Thanks.

Hi Jason, Stacking and link-aggregation works fine now. Thanks for the help!

Hi Jason, Thanks for the instruction and the reminding of the same firmware version. I had bought 2 XGS3700-24 and configured stacking on both devices. According to the link-aggregation, does LACP works too? Thanks.