otto001

Hi, ahm. sorry, this is my fault. The port 1 above was just for simplicity in the example. In real the Internet-port is 21. Port 1 and 8 are on a backup server which should be configured exactly as the main server (LAG on two ports, VLAN 1+10) - and there is even a third server for firewall backup, also the same. Stupid…

Hi! Unfortunately this settings did not work. I have a working LACP config: VLAN 1 seems to work, clients can reach the Server, but the server is not able to reach the external router. I should mention, that the servers have VLAN configured for the bridge that connects to the external router like this: auto vmbr1 iface…

Hi! thanks a lot! I am on a business trip today and tomorrow, will try this tomorrow evening and let you know if it works! Thanks again! Best regards, Otto

I hope, the pictures help to clarify my situation. The "server" is spuckneu (the others are backup-servers currently turned off). At this moment, the GS-1920 is turned off. My problem was that the clients could not even ping either the server or the server could not reach the Internet-gateway. This is why I was asking for…

Hi! sorry for not being too specific. The idea is to have the "external router" seperated from the internal network using VLAN. So there is a opnsense VM running for routing, but the DHCP server is a different VM in the internal network. so only the opnsense VM (or the host where it is running on) should be able to access…