ppandmary  Freshman Member

* One last question. When configuring for max clients on access point is the maximum client count per radio profile name? SSID? vLan, etc?. i.e. If 8 SSIDs are added; 4X guest and 4X office how many clients can attach to AP before load moves to neighbor AP? I believe for WAC6503d-s max is 64 or 128.... * The latest 6503…

Thanks for all your help

Here are the 2 questions as mentioned above: 1) Why cant the L2 is option be implemented on the guest network? 2) Why is the wifi speedtest.net 5-10X slower than wired?

Here are the config files

Can I download a config for you?

I also added routing IAW PeterUK mentioned. See picture. Now that internet is working looking at speedtest.net. 400M on wired, 80meg wireless.

ARP my mistake. Added 3 policy rules, corrected DNS, Added 2 zones and eliminated Lan1/v200 via policy. L2 iso is not for vLan100 (corporate network); printers, etc. vLan200 L2 iso would be good but member option is not available. 3 pictures; Zones, L2 iso, fw policy. I also dropped thresholds on the AP Profiles for both…

Once wifi is set Threshold and steering will be set for both SSIDs

This is beta testing. All guest wifi needs so far is isolation and internet. A) Create VLAN100 and VLAN200 interfaces based on lan1 with static IP address and DHCP server. DONE. B) Create 2 AP profiles. One is for VLAN100, and another is for VLAN200. Please add the security profiles if needed. DONE. C) The station should…

The way I have done a guest network is: LAN1 P4 as non-guest SSID Local bridge VLAN 1 VLAN Support off. 1) P3,4,5 Lan1 (P6 is guest interface), ssid is default Zyxel vLan support off..... OK Make a VLAN 200 on the USG60 base port LAN1 make a zone call it Guest Wi-Fi so its not lan1 SSID Local bridge VLAN 100 VLAN Support…

OK will start w 6503 attached to USG. Get it working then post again. PS: It was not too hard to repl EZ. Reset, back to 1234 pw. Starting again. I thought EZ was too EZ. WiFi/Guest wizard is useless except for home use. This is not home hardware. Thanks will get to it. Frustrated Paul.

USG60 Controller | Switch | AP Or: USG60 controller | AP Or: USG60 | AP configured as a stand-alone I removed the switch for stage isolating no wan connection. I have not reset the AP as stand alone. Idea is begin simple and add complexity Simple means no EZ, 1 VLAN, no controller. Next add controller Next add switch

Will removing the associated EZ ssids break the EZ connection. Or have to remove objects as well?

That is what I figured. WAC6503D-s Been working on vLans all last week. The only way I have been able to get vLan 100 or 200 to internet connect is to set them as management. Then usually have to reset AP and start over.