sp2001

hi, made some test, if I ping between 2 machine on the same vlan that I use for 10gbit it work fine with jumbo frame but if I ping a machine connected to another vlan and machine on the second vlan has standard mtu it doesn’t work, seems xs1930 is not sending a path mtu message telling the source machine that packet need…

Hi @Zyxel_Melen, some update, xs1930 is connected to a GS1900-24 both device report the respective connection port to be 1Gbit/s full duplex, I've also tested connecting the 1 gbit/s pc directly on a port of xs1930 assigned to vlan50 getting same performance so issue doesn't seems to be related to the other switch or…

Hi, below the config, let me know if you spot something that can justify the vlan routing bad performance: ; Product Name = XS1930-10 ; Firmware Version = V4.80(ABQE.1) | 02/01/2023 ; Service Status = Not Licensed ; SysConf Engine Version = 1.2 ; Config last updated = 02:41:11 (UTC+03:00 DST) 2023-05-27 no service-control…

Hi @Zyxel_Melen I have 2 vlan defined on the switch, 1 connected at 1gbit/s to another switch, the other with 2 machine directly connected at 10gbit speed, iperf3 between machines on 10gbit vlan get 9.47 gbit/s throughput, from machines on 10 gbit/s vlan to machine on 1gbit/s vlan I get 30mbit/s with iperf3, just for…

Hi, I've configured vlan routing, but performance is very bad, something like 30mbit/s is this normal ? If those are the expected performance it is unusable. let me know best regards SP