tsteele  Freshman Member

Further update, looking at the NWA3560 config from the CLI, the 'config-wlan-radio default_slot2' section has 2g-channel 6 5g-channel 36 there is no 'band 5g' , if I do 'configure terminal' then wlan-radio-profile default_2 then try and enter band 5g, I get the message ' % Command removed due to the platform upgrade. You…

Sorry I don't know what you mean bt in your first reply you show that the NWA3560-N is supported in firmware 4.73 patch 2 for the USG110 / 310, so I am unsure as to why I cannot get it to work, and why I am seeing both SSID's in the 2.4GHz band and none in the 5GHz band, when I have set profile 'default_2' to be 5GHz. I…

Further update, I left everything connected up and with an internet connection on the WAN port of the USG and after some time, it now seems to have updated itself, I am able to manage the NWA3560 and the firmware version now shows as 5.10(UJC,3) But exactly the same thing happens, the default profile I have which is set…

I have reset the USG110 to factory defaults, the device firmware shows 4.73 AAPH.2, the NWA3560-N is showing 2.23 UJC.8, I have reset the AP to factory default and set it to managed mode from the browser. It is showing up when I go to the 'Wireless' then 'AP management' page in the USG and has a DHCP provided IP address in…

@Melen, thankl you for that information, then it looks like the NWA3560-N is supported, but I tried for two days to get it to work on 5G and could not. I will try again this afternoon, and confirm exactly which firmware versions I have on the AP and the USG and post back if that is ok. I'll do a factory reset on the USG110…

@PeterUK Thank you for coming back to me, I also raised a case with Zyxel support, they have also just replied.It seems that you are correct, it isn't possible to do what I want with the USG.Unfortunately, putting another switch in the cabinet next to the USG is not really possible, there is no 240v power, nor any physical…