Mijzelf 
Guru Member
-
Re: NAS540, FW V5.21(AATB.13), "manage" option greyed out, can't edit RAID settings
I am inclined to trust command line tools rather than a gui wrapper. Especially when that gui uses fantasy namings. And it's not hard, you only have to read the documentation carefully. In most …1 -
Re: [NAS542] Network config / best practice?
The ports can be trunked, but then your switch has to trunk it's ports either. A simple switch cannot do that, you need a managed one, which supports trunking. In that case both 1Gbit ports are …1 -
Re: NAS542, Download previous Firmware
To be able to downgrade, you first have to login over ssh/telnet, and execute suecho 1 > /firmware/mnt/info/revision1 -
Re: NAS542 Can't find NAS on the network after shutdown/reboot, not even after reset
Have you tried: another cable another switch port another network port on the NAS? (IIRC, it was one where I was using all available space except one disk, i.e. 1/4th of the space was used for RAID c…1 -
Re: NAS326 defaults after restart or shutdown
Last command gives sh: flash_eraseall: not found OK. According to the script in NAS326.zip it's 'flash_erase /dev/mtd2 0 0' on the NAS326. Don't ask. I won't be able to use R…1
