PeterUK 
Guru Member
-
Re: site-to-site VPN works, but no ping/traffic
In my setup I have USG60W VLAN4093 192.168.252.0/23 with tunnel FLEX200H Ge3 192.168.254.10/29 as WAN to LAN2 192.168.254.9/29 on USG60W VLAN47 on FLEX200H 192.168.255.32/28 To ping 192.168.255.40 fr…1 -
Re: USG60 - IPSEC VPN failing at Phase 1, even though proposal seems to match?
for windows default are For the windows client L2TP/IPsec last I checked was Phase 1 3DES/SHA1 DH2 Phase 2 AES256/SHA1 PFS none however this can be increased https://community.zyxel.com/en/discussion…2 -
Cold boot FLEX200 SFP not coming online
USG FLEX 200 V5.37(ABUI.2) So had a power cut that my UPS could not keep everything running then when power come back the SFP looked dead after checking which is connected to a NETGEAR GS110T things …1 -
Re: USG FLEX 200H VLAN where? web interface toddler version?
This is what your looking for1 -
Re: IPSecVPN - Cannot ping remote IP range
Devices need to allow ICMP inbound on there firewall for one. you maybe need a routing rule above any other rules like LAN1 next hop WAN with a rule above LAN1 destination subnet of IPs over the tunn…1
