Internetheavyuser  Ally Member

I use Google translater for your question. Device type NR7103 , SN / S220Z41006523 does not work with the preset password from the label, how can it get the admin password please.. Is this the first time you use PW? Or you can log in with PW before but you cant do it recently. Have you tried to reset the device? use pin to…

I only see V2.00 on their offical website. Otherwise it would be the model which launch with ISP. Where did you buy LTE3316-M604?

Do they give you the reason why?

Then I suggest you to ask Telia for further assistant.

Does the reboot only happen you do the speedtest? Besides reboot, does everything work fine? Where did you buy the device? If you buy it from the ISP (A1 Austria), you can ask ISP for help.

It seems like you are using the same WAN. Dont use the IPPT IP (165.233.23.240)from the NR7101 (AKA the device connect to NR7101). Because you can access the GUI from the IP+1 (165.233.23.241) or IP-1 (165.233.23.239)(according to the subnet). In your first post it was (165.233.23.241) Use another device which is not using…

I think normally they will not release the root PW for user. Or can you say what kind of function you want to achieve?

It is Zyxel's design in IPPT mode for the user to access GUI of NR7101 from the LAN side. You can try use another PC from the WAN side to access the GUI of 165.233.23.241. Which is not possiable. If you can ping 165.233.23.241 from the WAN side that might be another device.

I did not hear they provide this function. You can feedback to ISP to see whether they will accept this request.

I think it would be better to ask three for further information.

Which device do you use? I think they did not update all the model at the same time. LTE7480-M804 has already release V1.00(ABRA.9)C0 https://www.zyxel.com/global/en/support/download?model=lte7480-m804

Which ISP did you purchase this device? If this is ISP FW, you might need to ask the ISP for further assistance.

?Did you use Admin account for this command? What is the result of the command ?

What is the gate way IP of UDM SE EX: UDM SE 192.168.22.62 and it's gate way IP is 192.168.22.61 You can try http://192.168.22.61 Because you mark the IP it is start with 10.240.8…. You can find the gate way IP of this IP

I checked the data sheet on EX3301-T0 and it shows as follow. It shows that EX3301-T0 only test to pair with WX3100. I think it is not guarantee NR5103Ev2 and EX3301-T0 can mesh.