Комментарии
-
At the time of your testing, did you make sure that you were the only one using that line, or could there be other devices with access to your internet connection at the same time?
-
Sorry to hear that. To me, it looks like your device is bricked and cannot be reset. Unless your device is under warranty, you may need to replace it with a newer and working device. I am 90% sure that there is no coming back from the scenario you described. ( I could be wrong, but it looks like your device is in deep…
-
The Zyxel device automatically creates .conf files beginning with ez_ for settings used in Easy Mode, this file creation takes place in Expert Mode. You should not or can not delete those files. User Guide chapter 4.1.1 Objects and Rules — page 89. Regarding startup-config-bad.conf, see page 827, chapter 33.2 The…
-
Very well, looks like you have tried the usual troubleshooting, so we just have to wait for some of the Zyxel Team members to post suggestions for how to resolve your issue.Раздел: Problem with Multy U password resets itself to original Комментарий от TrondBKSuleimanCo марта 2023
-
Not sure what the actual solution is, but maybe there is a storage issue when changing the passwords, so it returns to default. Generally speaking, maybe it could help to reset the system to factory settings, then change the passwords, and after confirming that the passwords are stored, apply your preferred configuration.Раздел: Problem with Multy U password resets itself to original Комментарий от TrondBKSuleimanCo марта 2023
-
Admittedly, it has been quite a few years since I was in a similar situation and needed support to set up a stable VPN connection. Even so, I would like to suggest that you may want to check if LAN traffic on any side of the VPN tunnel could create network traffic noise, affecting the VPN tunnel performance. For…Раздел: USG210 Firewall IPSec VPN Tunnel Site-To-Site Low performance Комментарий от TrondBKSuleimanCo марта 2023
-
https://support.zyxel.eu/hc/en-us/articles/360012744371-What-can-I-do-if-I-forgot-my-USG-FLEX-ATP-VPN-password-or-cannot-access-it-anymore
-
My reply may not be exactly what you asked for, but it is as close as I could get on short notice. A similar question was asked and replied to in the following discussion from 2020-01-23:
-
I am pretty sure you need to create a policy rule to allow the packets to travel from LAN on one side over to the connection link. I don't remember the exact details, but I believe you need to add the policy rules on both sides, allowing NetBIOS traffic to go through the VPN connection.Раздел: Accessing shared folders over IPSec Site to site VPN Комментарий от TrondBKSuleimanCo марта 2023
-
You could save the registry key to a file (*.REG) and send it as attachment to all users who need to run this update, saving yourself from doing it. You could also add it to your Windows image on DVD, or USB image file, to have it integrated into each setup when you have to reinstall computers.Раздел: USG Flex 100 problem setting up L2TP VPN from Wizard Комментарий от TrondBKSuleimanCo марта 2023
-
You could theoretically be in a situation where parts of the system board is defective and can not be reset. Even so, you should try to reset the device even more diligently by applying the "30-30-30 Hard Reset" procedure:
-
The email address is like a user account. If you need to use a different email address, you probably need to create a new account. Otherwise, if that is not a practical option, please contact ZyXEL Support directly.
-
Unless you are trading with Chinese partners, it is safer to block all of those data mining addresses & sites. Only allow those addresses you can verify are part of a communication chain with your existing contacts.
-
At first glance, I thought I was looking at a cut-off from the character # (hashtag), but I guess it is a different and separate character. I can't guarantee that this is the correct answer, I have used the Windows app CharMap to look for a similar character. Here is something looking somewhat similar, just with 1…
-
Unless you have to use the new firmware version because of some other critical update, the normal response when a new firmware breaks something is to downgrade to the previous stable version, until another new firmware upgrade is RTM.Раздел: firmware upgrade (4.60 to 4.62) breaks device-ha Комментарий от TrondBKSuleimanCo февраля 2021