Greenlight 
Ally Member
評論
-
You can check the Specification page of each AP on Zyxel official website, which indicates the antenna number, support standard and the theoretical data rate of each AP model. The actual throughput is floating due to different wireless environment, client capability, wireless settings.... In my test, with the Max of 866…
-
Probably the MAC you entered isn’t the actual gateway MAC address of the vlan22. you can try to type “arp -a” on the cmd of the windows laptop, then check what’s the actual MAC of its gateway, and type it in list.
-
As far as I know, AP Group is only supported on the AP Controller. If you want to configure different radio setting for APs on Nebula, you can customize(overwrite global setting) each AP's radio settings on the "radio setting" page. And to customize each AP's SSID, you can use the SSID tag to set them up.
-
@baba Did you pass the two factor authentication first, but still see the error message? From the screenshot, the certificate comes from the USG flex 200, not from the AP. So it seems the traffic is intercepted by the firewall. Is there a usgflex200 in your network? Did you set the web authentication or some function that…
-
Think you can check this post and see if this is also you scenario. https://community.zyxel.com/en/discussion/12428/nwa50ax-led-alternating-between-green-and-blue#latest
-
I also use Nebula to manage my home APs (there're two devices). I think the most convenient thing is, I can check my AP's status even I'm outside my house. Also, I can complete all the settings through Internet, and I don't even need to know my AP's IP address in my house! You can try to use Nebula for AP management even…
-
What model do you use ? (I mean is it an NBG, or NWA/ WAX...Products)? As far as I know, NBG products only support adapter for power up, while NWA/WAX Series products supports PoE function (you can find 802.3at/af in their specification)
-
@hfr_dk Did you try to press the reset button on AP and let it online on NCC again? Think you can try to this way, and see if the issue still remain the same... Just like what I experienced, sometimes when the LED error occurs, it can be solved by reset device.
-
你AP的IP位置還是192.168.1.2耶，是手動設定的嗎? 還是你是直接把AP開機，就接在控制器上? 如果是後者的話，AP是不會去找控制器的。 看你要不要進AP的設定頁面，給他一個固定IP試試
-
Can your device successfully only on Nebula? If other functions are normal, I'll try to reboot or even reset the AP, and see if the LED works well. (Maybe...just the LED process got interrupted when booting up)
-
我們的案場也是使用NWA210AX ，前陣子設定160ＭHz在36頻道，很少有收到使用者的抱怨。有報連線問題的，通常也是有些使用者OS的版本還在比較舊的，不想升級。我們就會「勸說」請他們升版到Android10，後來都算正常這樣。 (我們有些同仁使用三星S9+，也沒印象有報問題)
-
May I know how you recover your device and make it on the Nebula?
-
What issue you've found there? I'm also used NWD6602 before, although there's no issue during the working hour, I still want to avoid any possible issue on my goods.
-
@Cammage08 I'm curious about the reason why you'd like to login to device GUI after moving it to Nebula? Since all settings can be done on Nebula, so far I can't come out if there's any need to login my device. Or is there any management ideas I might missing?
-
One possibility is, laptops connect to different APs with different signal strength, and got kicked out due to low signal strength. You can try to disable the "Smart Steering" function under the [Access Point > Configuration > Radio Setting] ?
