評論
-
PeterUK, Yes, it is very close to that except I have the AP connecting via a trunk port to the switch allowing all 5 vlans. The ports to the Flex 700 from the switch are untagged for the respective vlans and all other ports on the vlan are allowed with the rest forbidden. I would like to set it up with vlans on the Flex…
-
Thank you for the assistance Zyxel_Judy. I do know how to create the actual interface on the firewall and switch, but I am unsure of how to setup the firewall for the vlans. What do I use for the base port for the vlans? Do I create a network just for the firewall itself and then use that for the base port for all the…
-
I have all vlans but 70 in LAN zone, and vlan70 is in Guest Zone (created).
-
mMontana, 1: I have firmware version 4.70(ABMI.6)C0 installed. I did not see anything in the release notes for ABMI.7 that would appear to correct this issue (and I think it may be configuration) 2: No bandwidth control is being used on the firewall or on the switch? 3: The cables are the same used for both tests (560mbps…
-
Hi James, It is logged when the update is automatic, and it is a pop-up window and logged when I try to update it manually, which I found in the community resolved this issue previously. Jay
-
I have a USG Flex 700 running firmware version 5.31(ABWD0) which is having the same continuous error "2022-09-26 14:45:03 error myZyXEL.com Certificate download has failed.). I have tried unsuccessfully to perform the update manually, but it continues to fail that way as well. "SSL Certificate download has failed. (failed)…
-
1) No, there are no logs for the blocking of the Echo Dots. I was hoping to find a log that would allow me to filter the specific domain/site. 2) I will try this for the echo dots, but I really wanted to keep the filter working for everything else with it, without opening the IP up completely. Thank you for the assistance!
-
#USG FLEX TOGETHER ON NEBULA! Manage all of my equipment in one spot makes life so much easier!
-
I have another question. How do I allow the GS1920-24HPv2 switch to use the Flex 700 as the NTP server? I can use an outside time server, but I generally always use the firewall/router for the time for downstream devices. If I set the NTP server address to the Flex 700, the switch cannot update its time. Please bear with…