lalaland 
Ally Member
評論
-
Just realized I’ve been sticking around this forum for 2652 days! 🤯#MyZyxel2024
-
You can try to create a static route on flex700 Destination : Distant servers IP subnet mask : 255.255.255.255 (single host for DNS query) Interface = Vlan20 Interface IP firewall should be able to send out DNS query via vlan20 interface IP to remote subnet for local out traffic.
-
The factory default still keeps backup configuration files, certificates, and some other files. Holding down the RESET button performs an action similar to copying the system default configuration to the startup configuration file.
-
Can you share more information about your scenario?
-
The GEO IP database doesn't undergo frequent changes. If triggered for an update every time the system boots up, wouldn't it cause system busyness?
-
here you are
-
It's about the syslog message header. The first 5 bits 10001 maps to facility Local 1 The last 3 bits 110 maps to level INFO Raw data binary 10001110 to decimal is 142. Is the prepended number in syslog also can be seen in other brand device ?
-
UAG50 is EOL. Maybe you can try to replace other micro usb lan or cable for cross check
-
It sounds like there may be a compatibility issue between the Zyxel ATP200 and the Hiltron EN2251 cable modem. You can update to the latest firmware first; it will solve the IP confliction warning message. https://community.zyxel.com/en/discussion/15957/zld-v5-35wk06-firmware-release#latest Does the Hiltron EN2251 have…
-
What is your sever signed certificated key mode in USG310? ECDSA or RSA?
-
Windows 11 is not in SSL vpn client support list, but my windows 11 21H2 works fine without issue after reboot.
-
Please try this link, it would be helpful. https://www.wootechy.com/whatsapp/whatsapp-notifications-not-working/#:~:text=Allow%20Notifications%20on%20WhatsApp,-If%20your%20device&text=Make%20sure%20your%20WhatsApp%20notifications,Message%20notificaitons%20and%20Group%20notificaiton.
-
Do you mean that phone APP and Roborock S7 must in same subnet for connection?
-
AD setting in SDWAN is at site => configuration => Authentication tab
-
DPD is enable by default in Nebula. so you cannot see the options in Nebula.
