WJS  Master Member

You can give the same subnet address in Virtual Server "public IP" Firewall will do proxy ARP so traffic know where to send

As PeterUK said, try to change Firewall's LAN IP to prevent the conflict

It said the site is phising. But I believe that in a few days classification will not be phising if he is really normal. You can add to allow listed as workaround if you want.

I found some FAQ talk about Voice VLAN

As far as I know, the vlan setup on sip phone is named voice VLAN with tagging. The purpose is to separate the voice stream and data stream. -So do the appropriate settings on swtich after you added voice vlan. -Create vlanXX interface if the voice stream will goto internet.

What's your IP address on USG40 WAN when LTE bridge? It should not work if you get CGNAT addresses (100.64.0.0~100.127.255.255)

SFP Port can act as LAN Port, but it cannot become the same lan role with other Lan As you saw in "Port role", SFP Port is independent.

I'd like to use APP patrol instead. Here is App category named: Windows upgrade. or follow PeterUK instruction setup blocklist on CF lists

You can set virtual server or 1:1 NAT instead of 2 ports, Firewall will respond ARP of other public IP in this case. I believe it is the best way that only open necessary ports by NAT, moreover firewall can prevent some attack from internet.

Find the datasheet, FLEX200 does not support SFP+ .

You can add another zone fwd what you want to overwirte.

The latest geo DB version is 0329 exactly.

Try the weekly

create another policy with higher priority. You wanna exclude IP1 For example: Rule1 : IP1 allow any Rule2: IP1's subnet allow any with scheduled.

How did you do "planification to shutdown internet connection", you mean you already implemented on FLEX500 ?