Best Of
Re: SmartMesh extremely unstable on two NWA50AX
@Zyxel_Kay Hi! Any news on when I will be able to go back to the default version?
agrsdl
Re: Connection of MacBook with 5ghz SSID fails
The other issues (with workstations) have not returned. All seams to be stable for the workstations now. Thanks for the help.
Re: GS1900-8HP PoE Issue
It gives the message "POE INIT FAIL".
As it is out of warrenty I have opened it and found that a diode was broken on the PCB in the 3.3v switching power supply part that provides power to the Broadcom POE chip.
As a consequence of this TP14 doesn't measure 3.3v
I replaced the diode (B1100 SMD diode) and now my beloved switch is working 100% with POE.
For anyone out of warrenty and doesn't want to put this otherwise good switch in the trash I hope I could help.
Greetings
Tom
tomdv
Re: Zyxel LTE5398-M904 connected to the cellular network but no Internet access
Guys I returned my router and bought a Huawei… Very sad about this but for me, after the latest update, it got really unstable. After the internet connection loss I was able to log into the router only via cable…
I hope you will find a solution!
And @BruCom, yes, I had the very same sequence of logs after the connection loss.
Re: Zyxel LTE5398-M904 connected to the cellular network but no Internet access
Lastly, also for me no answer from the support!
Re: Manuals about Zyxel NR5103E and Zyxel Air App help documents ?
Hi Bob
Could ypu please share with me too
Thank You
Re: POE++ IEEE 802.3bt Type 4 (High Power POE)
Hi @mw_dw,
Thank you for bringing to our attention your requirement for PoE++ class4 type 8 (90W) support on the XGS2220 switch. Although this feature is currently not supported by the switch, please be assured that Zyxel Networks remains committed to meeting the evolving needs of our customers in the PoE++ market.
I will pass your requirement to our switch product team for consideration and add it to our marketing survey list.
Re: Connection of MacBook with 5ghz SSID fails
Hi @PimK82
Our AP currently doesn’t support a reboot schedule feature. However, we recognize that this functionality could be useful for many users, and we would like to propose it as an idea for evaluation.
You can find the link to the idea section below, where you can track its progress:
AP Reboot Schedule feature — Zyxel Community
Thank you for bringing this issue to our attention. We appreciate your feedback and suggestions to help us improve our product.
Kay
Re: NBG7510 - can I configure it without encapsulation on the WAN port?
Hi @tonygibbs16
If you have already set it up PPPoE on your Zyxel DSL home gateway, then you do not need to set it up again on your NBG7510 router. You can simply connect the WAN port of your NBG7510 to Zyxel DSL and configure the NBG7510 for use as a router.