-
How to config LAN interface for security router ?
For model :SCR50AXE/USG LITE60AX Go to Site-wide > Configure > Security router > Interface The default LAN IP subnet settings for the security router are 192.168.168.1/24 You can click the edit icon on the right to change the IP address. Don't miss this great chance to upgrade your Nebula org. for free!…
-
If my WAN and LAN IP address are on different subnets, can the LAN subnet access the WAN subnet?
Yes, it is possible for the LAN subnet to access the WAN subnet, provided that the appropriate routing and firewall rules are configured. The security router will hande the routing between the two subnets allowing traffic to flow between them.
-
How to set up WAN setting for USG LITE 60AX on Nebula?
To config USG LITE 60AX WAN settings, you can go to Nebula. Navigate to Site-wide > Configure >Security router > Interface Click the edit icon on the right You can select the WAN type under the Interface properties
-
Does the security router need a license for onboarding?
No, the security router does not require a Nebula license to complete the onboarding process. For more information about the Nebula license, you can refer to the article below https://www.zyxel.com/global/en/nebula-license-overview
-
Can I manage the USG LITE 60AX without Nebula?
You can manage the USG LITE 60AX locally without Nebula. However, the local GUI has limited configuration options compared to what’s available through Nebula. The local GUI configuration includes basic WAN settings. For other detailed settings, you'll need to configure them in Nebula.
-
How to access local web GUI to security router SCR 50AXE?
Please ensure your laptop is connected to the Wi-Fi broadcast by the security router SCR50AXE or directly to one of the physical ports (1 to 4) on the SCR50AXE. Note: Do not connect to the internet port, which is marked with a global icon. You can Open the browser and key in Gateway IP address: 192.168.168.1(default) to…
-
What is the default lan settings of security router?
Go to Site-wide > Configure > Security router > Interface The default LAN IP subnet settings for the security router are 192.168.168.1/24 You can click the edit icon on the right to change the IP address.
-
Do I need to open the port on the security router to enable NAT?
To enable the NAT feature on security router. Go to Site-wide > Configure > Security router > Firewall Note:No additional policy is needed to enable NAT.
-
Does the Security Router Support VPN with a Certificate?
The Zyxel Security Router does not currently support VPN connections using a certificate. Although the online documentation refers to downloading a ZIP file containing the VPN remote access configuration script, including certificate (.crt) and script (.bat) files, the current functionality requires using username and…
-
Can I only use FLEX50 Port 6 to configure a second WAN connection?
Question: Can I only use FLEX50 Port 6 to configure a second WAN connection? Answer: Yes, the use of Port 6 for a second WAN configuration is correct. Ports P2-P5 are designated for LAN usage only. If you need to configure a second WAN, you should use Port 6 as specified.
-
How do I back up my firewall settings before making changes?
Question: How do I back up my firewall settings before making changes? Answer: Unlike on-premise systems, Zyxel's Nebula Control Center (NCC) does not offer a direct backup option for firewall settings. However, you should not worry about causing device offline issues because Nebula has a rollback mechanism that ensures…
-
Is there any other way to config the security router SCR 50AXE except using Nebula?
To configure WAN settings on the SCR 50AXE model outside of Nebula, you can access the LAN IP address via the web GUI to configure the WAN interface. The default IP address of the SCR 50AXE security router is 192.168.168.1 1.Open browser and key in Gateway IP address : 192.168.168.1(default) to access Web GU 2.Click the…
-
How do I turn off Mesh function on the security router USG LITE 60AX?
To turn off the Mesh function on USG LITE 60AX Go to Site-wide > Configure > Security router > Router settings You can disable the Mesh function under general settings
-
What is the default LAN settings of security router SCR 50AXE?
The default IP address of the security router SCR 50AXE is 192.168.168.1 Below are the default LAN settings for the SCR 50AXE
-
Does SCR 50AXE support OPEN VPN or wireguard?
The SCR 50AXE does support Site to Site VPN, but does not support OPEN VPN or wireguard. If you require the Remote Access VPN feature, you can refer to the USG LITE 60AX model.
-
Does SCR 50AXE support remote access VPN?
The SCR 50AXE does support Site to Site VPN, but the model does not support remote access VPN. If you require the Remote Access VPN feature, you can refer to the USG LITE 60AX model.
-
Where can edit my SSID name on security router?
Go to Site-wide > Configure > Security router > SSID settings Click the "Edit" button on the upper right corner of the SSID profile The SSID name can be modified in the Basic info
-
How can I assign a VLAN ID to a LAN port on security router?
Go to Site-wide > Configure >Security router > Interface Click "Add" to create a new interface You can assign a VLAN ID for the added interface. Note: It is not available to modify VLAN ID of the default LAN interface
-
What is the Minimum Internet Speed setup for SCR 50AXE on Nebula?
For the SCR 50AXE to successfully come online on Nebula, we recommend a WAN speed of at least 10-20 Mbps. While some users have experienced difficulty at lower speed , upgrading to a higher speed (e.g., 50 Mbps) resolved the issue. Therefore, to ensure a smooth registration and synchronization process, a higher speed…
-
Do my threat prevention on security router still work after license get expired?
The threat management function will continue to operate even after the license has stopped or expired. To verify if threat management is still active, attempt to access the domain ' www.goooooooooooooooooooooooooooooooooooooooooooooooooooooooooogle.com' If the website is inaccessible and event logs appear on the Nebula…