-
USG FLEX 50W Auto Update Not Updating
Hello Everyone, Has anyone had any problems with the auto update feature not actually updating the firmware to the standby partition on a USG FLEX 50W? The units we manage seem to not be updating the firmware at all for some reason. I see they perform the check and it shows a new firmware is available, however it does not…
-
syslog RFC3164 issue
Hello, it seems the USG 100 flex does not follow RFC3164 Device : USG FLEX 100 v5.37 The raw syslog the message received from USG has 2024 after the timestamp, which does not conform to RFC3164 : <149>Jan 26 16:54:41 2024 usgflex100 src="0.0.0.0:0" dst="0.0.0.0:0"…
-
Подключение по rdp из внешней сети
Как настройки нужно произвести на ATP200 чтобы Подключение по rdp из внешней сети(internet) подключалось к определенному компьютеру в сети lan. Спасибо
-
Firmware for ZyWALL 2 Plus
Hello, I'm new here, new job, new legacy hardware to manage... so here is this old ZyWALL 2 Plus and I'd like to update its firmware. However this model is not listed into MyZyxel portal. Where can I find the firmware for it?
-
L2TP Ipsec AD login crash on last Firmware
Hy team. In last firmware of all devices (ATP and Flex Series) the loggin with ad user crash. The connection with server is OK with on log sais " Incorrect username or password" I downgrade the firmware and connection with ad user is working now. In ikev2 connections is working. Thanks!
-
from LAN to LAN over bridge
Hello, I have USG Flex700 and I am manging two different ISP networks withthe ZyWALL - one is main ISP and the other is of legally-established entity. I was able to set it up with the great help of this community - via bridge as described within The bridge is defined as follows: Policy route: Of course some demands…
-
V5.37(ABFW.2)
When will the release notes become available for the ATP200 Firmware release V5.37(ABFW.2)?
-
SCR50 AXE and Nebula
Hello, I use the SCR50AXE in conjunction with Nebula. When I enable threat management, it slows down traffic significantly. Websites then take up to 10 seconds to open or update. If I use the SCR50AXE without Nebula, the speed is very good. Greetings Marcus
-
Youtube restricted mode
Hello, For some reason YouTube is now showing "Restricted Mode has hidden comments for this video" for all videos when accessing the site through USG60W. If I connect my computer (or phone) directly to the modem, the restricted message does not appear. If I connect through USG60W (either wired or wireless) the restricted…
-
Problem with MAC binding to VLAN
On ZyXel USG FLEX I want to create some VLAN which each have own clients binding by MAC address. The VLAN will have specific private policy, etc. I tried to find any answer, but I can't find it. Actually, I have LAN2 on P6 and P7. IP Adress: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP IP Pool Start Adress: 192.168.2.111…
-
MacOS VPN Log (random disconnects at about 20-30 min mark)
I am connecting to a VPN that I setup in my company on the Zyxel USD 60 Router, IKEv2. Recv IPSec sa: SA([0] protocol = ESP (3), spi_len = 4, spi = 0x07d3ea59, AES CBC key len = 256, HMAC-SHA256-128, No ESN; ). This VPN works as expected until it randomly disconnects after about 20-30 mins. (Which of course breaks all my…
-
Port blocked?
Hello there! I'm sorry if this is in the wrong section. Quick recap. I use: Synology Nas - nighthawk R8000 - zyxel NR7103 with mobile connection. Before I bought the NR7103 and use land line I had no issues, the port 5000-5001 is open on nighthawk. Nas has static ip from nighthawk. But when I plugged in the NR7103 I can't…
-
Vodafone ISP WAN connection - PPPoE to USG20W
I have an issue almost identical to this case however the solution here has not worked for me: To summarise, I have a newly connected Vodafone 100mb business fibre connection with a single fixed IP provided by them. Standard router THG3000. Connecting to WAN port of ONT to WAN port on router. Vodafone have provided the…
-
Import certificate error ATP
ATP100, after the new Firmware Version V5.37(ABPS.1) / 2023-11-08 05:27:27 it is not possible to import .p12 certificate errno: -17011 errmsg: PKI certificate type is not supported.
-
Re-direction to external IP address
Following problem: We have a address (analysis.xyz.com) who is directed to our Zyxel USG110 (192.168.10.1). There the senders IP has to be a valid VPN-user, then he will be forwarded to a internal Server (192.168.20.115). Now this receiver is an external server (82.195.236.xxx). How to configure the Zyxel so the forwarding…
-
[ATP] allowing traffic to the edge router LAN
Dear all, Context: Our network look about like this: The edge router WAN port is connected to the atp500 P2 interface (external interface type). On the ATP500 firewall we have configured 3 different LAN on P5, P6, P7 ports. These interfaces was configured as Internal (Interface Type), and DHCP and everything is managed by…
-
SSO Agent supporta Apple iMac?
Hi, I wanted to know in an environment where webauthentication via SSO agent with AD is already present, if used with Mac OS clients inserted in the domain controller they were compatible
-
High system/user cpu usage
I've noticed for the past 3 days that my ATP500 is showing 95% cpu usage in the Nebula dashboard. I've rebooted it twice, but there has been no change. One of the reboots was done through SSH command. These are the results I get when running cpu usage query: Does anyone have an idea of what processes might be running under…
-
Static Route between two Zyxel Routers
I have a Zyxel USG Flex 700 that I use for my office network I have a Zyxel ATP 800 that I use to manage my remote switches in the field Both of these routers are mounted in the same rack. Right now, I have a VPN configured so that I can access my management network of the 800 from the internal office network of the 700.…
-
Filter package-trace for multiple port and for a specific host
I try to filter the traffic between the WAN port of a Zyxel Flex 500 (firmware v5.37) and a host (external IP address) for multiple ports, but the following commands shows me the traffic of all kind of ip addresses instead of only one. packet-trace interface WAN extension-filter match-host 62.x.x.x 62.x.x.x match-port 500…
